Suppr超能文献

非金属掺杂 TiO 的光催化脱色和杀菌应用:等温线、动力学模型和计算机分子对接研究。

Photocatalytic Decolorization and Biocidal Applications of Nonmetal Doped TiO: Isotherm, Kinetic Modeling and In Silico Molecular Docking Studies.

机构信息

Department of Environmental Sciences, COMSATS University Islamabad, Abbottabad Campus, Abbottabad 22060, Pakistan.

Institute of Environmental Sciences and Engineering (IESE), SCEE, National University of Sciences and Technology, Islamabad 44000, Pakistan.

出版信息

Molecules. 2020 Sep 29;25(19):4468. doi: 10.3390/molecules25194468.

Abstract

Textile dyes and microbial contamination of surface water bodies have been recognized as emerging quality concerns around the globe. The simultaneous resolve of such impurities can pave the route for an amicable technological solution. This study reports the photocatalytic performance and the biocidal potential of nitrogen-doped TiO against reactive black 5 (RB5), a double azo dye and . Molecular docking was performed to identify and quantify the interactions of the TiO with β-lactamase enzyme and to predict the biocidal mechanism. The sol-gel technique was employed for the synthesis of different mol% nitrogen-doped TiO. The synthesized photocatalysts were characterized using thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET) and diffuse reflectance spectroscopy (DRS). The effects of different synthesis and reaction parameters were studied. RB5 dye degradation was monitored by tracking shifts in the absorption spectrum and percent chemical oxygen demand (COD) removal. The best nanomaterial depicted 5.57 nm crystallite size, 49.54 m g specific surface area, 11-40 nm particle size with spherical morphologies, and uniform distribution. The RB5 decolorization data fits well with the pseudo-first-order kinetic model, and the maximum monolayer coverage capacity for the Langmuir adsorption model was found to be 40 mg g with K of 0.113 mg. The LH model yielded a higher coefficient K (1.15 mg L h) compared to the adsorption constant K (0.3084 L mg). 90% COD removal was achieved in 60 min of irradiation, confirmed by the disappearance of spectral peaks. The best-optimized photocatalysts showed a noticeable biocidal potential against human pathogenic strain in 150 min. The biocidal mechanism of best-optimized photocatalyst was predicted by molecular docking simulation against β-lactamase enzyme. The docking score (-7.6 kcal mol) and the binding interaction with the active site residues (Lys315, Thr316, and Glu272) of β-lactamase further confirmed that inhibition of β-lactamase could be a most probable mechanism of biocidal activity.

摘要

纺织品染料和地表水的微生物污染已被公认为全球范围内新出现的质量问题。同时解决这些杂质可以为友好的技术解决方案铺平道路。本研究报告了氮掺杂 TiO 对活性黑 5(RB5)的光催化性能和杀菌潜力,RB5 是一种双重偶氮染料和 β-内酰胺酶。进行了分子对接,以识别和量化 TiO 与 β-内酰胺酶的相互作用,并预测杀菌机制。采用溶胶-凝胶技术合成了不同摩尔%氮掺杂 TiO。使用热重分析(TGA)、扫描电子显微镜(SEM)、X 射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、BET 和漫反射光谱(DRS)对合成的光催化剂进行了表征。研究了不同合成和反应参数的影响。通过跟踪吸收光谱的变化和化学需氧量(COD)去除率来监测 RB5 染料的降解。最佳纳米材料显示出 5.57nm 的晶粒尺寸、49.54m²/g 的比表面积、11-40nm 的粒径和球形形态以及均匀的分布。RB5 脱色数据符合准一级动力学模型,Langmuir 吸附模型的最大单层覆盖容量为 40mg/g,K 为 0.113mg。LH 模型的吸附常数 K(0.3084Lmg)比 LH 模型的吸附常数 K(0.113mg)高。在 60 分钟的照射下实现了 90%的 COD 去除,这一点通过光谱峰的消失得到了证实。在 150 分钟内,最佳优化的光催化剂对人类致病菌表现出显著的杀菌潜力。通过与β-内酰胺酶的分子对接模拟预测了最佳优化光催化剂的杀菌机制。对接得分(-7.6kcal/mol)和与β-内酰胺酶活性位点残基(Lys315、Thr316 和 Glu272)的结合相互作用进一步证实,抑制β-内酰胺酶可能是杀菌活性的最可能机制。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/309d/7583793/b7ac78f77180/molecules-25-04468-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验