Procedure for Determining the Uncertainties in the Modeling of Surface Roughness in the Turning of NiTi Alloys Using the Monte Carlo Method.

The paper presents a procedure for the determination of uncertainties in the modeling of surface roughness in the turning of NiTi alloys. The presented procedure is applicable both to the analysis of the measurement values of the two main roughness factors, as well as to research related to the prediction and optimization of the machining process. Type A and B, total, and expanded uncertainties were considered herein, and the obtained uncertainty values were assessed. A procedure for optimizing machining by applying the Monte Carlo (MC) method is also presented. The solutions presented in this paper are important from the point of view of practical solutions related to the prediction and optimization of the machining process. The considered procedure for determining and assessing uncertainty can be useful for the optimal selection of both machining parameters and measuring tools.