Suppr超能文献

基于法布里-珀罗扫描器的宽带全光平面波超声成像系统

Broadband All-Optical Plane-Wave Ultrasound Imaging System Based on a Fabry-Perot Scanner.

作者信息

Pham Khoa, Noimark Sacha, Huynh Nam, Zhang Edward, Kuklis Filip, Jaros Jiri, Desjardins Adrien, Cox Ben, Beard Paul

出版信息

IEEE Trans Ultrason Ferroelectr Freq Control. 2021 Apr;68(4):1007-1016. doi: 10.1109/TUFFC.2020.3028749. Epub 2021 Mar 26.

Abstract

A broadband all-optical plane-wave ultrasound imaging system for high-resolution 3-D imaging of biological tissues is presented. The system is based on a planar Fabry-Perot (FP) scanner for ultrasound detection and the photoacoustic generation of ultrasound in a carbon-nanotube-polydimethylsiloxane (CNT-PDMS) composite film. The FP sensor head was coated with the CNT-PDMS film which acts as an ultrasound transmitting layer for pulse-echo imaging. Exciting the CNT-PDMS coating with nanosecond laser pulses generated monopolar plane-wave ultrasound pulses with MPa-range peak pressures and a -6-dB bandwidth of 22 MHz, which were transmitted into the target. The resulting scattered acoustic field was detected across a 15 mm ×15 mm scan area with a step size of 100 [Formula: see text] and an optically defined element size of [Formula: see text]. The -3-dB bandwidth of the sensor was 30 MHz. A 3-D image of the scatterer distribution was then recovered using a k -space reconstruction algorithm. To obtain a measure of spatial resolution, the instrument line-spread function (LSF) was measured as a function of position. At the center of the scan area, the depth-dependent lateral LSF ranged from 46 to 65 [Formula: see text] for depths between 1 and 12 mm. The vertical LSF was independent of position and measured to be [Formula: see text] over the entire field of view. To demonstrate the ability of the system to provide high-resolution 3-D images, phantoms with well-defined scattering structures of arbitrary geometry were imaged. To demonstrate its suitability for imaging biological tissues, phantoms with similar impedance mismatches, sound speed and scattering properties to those present in the tissue, and ex vivo tissue samples were imaged. Compared with conventional piezoelectric-based ultrasound scanners, this approach offers the potential for improved image quality and higher resolution for superficial tissue imaging. Since the FP scanner is capable of high-resolution 3-D photoacoustic imaging of in vivo biological tissues, the system could ultimately be developed into an instrument for dual-mode all-optical ultrasound and photoacoustic imaging.

摘要

本文介绍了一种用于生物组织高分辨率三维成像的宽带全光平面波超声成像系统。该系统基于用于超声检测的平面法布里-珀罗(FP)扫描仪以及在碳纳米管-聚二甲基硅氧烷(CNT-PDMS)复合膜中光声产生超声。FP传感器头涂覆有CNT-PDMS膜,该膜用作脉冲回波成像的超声透射层。用纳秒激光脉冲激发CNT-PDMS涂层,产生具有MPa级峰值压力和22 MHz的-6 dB带宽的单极平面波超声脉冲,这些脉冲被传输到目标中。在15 mm×15 mm的扫描区域内,以100 [公式:见原文] 的步长和 [公式:见原文] 的光学定义元件尺寸检测产生的散射声场。传感器的-3 dB带宽为30 MHz。然后使用k空间重建算法恢复散射体分布的三维图像。为了获得空间分辨率的度量,测量了仪器线扩展函数(LSF)作为位置的函数。在扫描区域的中心,对于1至12 mm之间的深度,深度相关的横向LSF范围为46至65 [公式:见原文]。垂直LSF与位置无关,在整个视野范围内测量为 [公式:见原文]。为了证明该系统提供高分辨率三维图像的能力,对具有任意几何形状的明确定义散射结构的体模进行了成像。为了证明其对生物组织成像的适用性,对具有与组织中存在的那些类似的阻抗失配、声速和散射特性的体模以及离体组织样本进行了成像。与传统的基于压电的超声扫描仪相比,这种方法为浅表组织成像提供了提高图像质量和更高分辨率的潜力。由于FP扫描仪能够对体内生物组织进行高分辨率三维光声成像,该系统最终可发展成为一种用于双模全光超声和光声成像的仪器。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验