Integrated Bioprocessing Laboratory, School of Bioengineering, SRM Institute of Science and Technology, Kattankulathur, Chennai 603 203, India.
Department of Chemical Engineering, SSN College of Engineering, Chennai 603 110, India.
IET Nanobiotechnol. 2020 Oct;14(8):732-738. doi: 10.1049/iet-nbt.2020.0021.
In the present study, amino-functionalised mesoporous silica microspheres were utilised as support for the covalent immobilisation of lipase B (CaLB) for the subsequent production of 2,5-furandicarboxylic acid (FDCA) from 2,5-diformylfuran (DFF). Under the optimised operating conditions of pH 6.5, particle/enzyme ratio of 1.25:1.0 and glutaraldehyde concentration of 4 mM, a maximum CaLB immobilisation yield of 82.4% on silica microspheres was obtained in 12.25 h. The immobilised CaLB was used for the synthesis of alkyl esters, which were utilised along with hydrogen peroxide for FDCA synthesis. The biocatalytic conversion of 30 mM DFF dictated a 77-79% FDCA in 48 h at 30°C; where the turnover number and turnover frequency of immobilised CaLB were 6220.73 mol mol and 129.59 h, respectively, for ethyl acetate, against 6297.65 mol mol and 131.2 h, respectively, for ethyl butyrate. Upon examining the operational stability, the immobilised CaLB exhibited high stability till five cycles of FDCA production.
在本研究中,氨基功能化介孔硅微球被用作固定化脂肪酶 B(CaLB)的载体,用于随后从 2,5-二糠醛(DFF)生产 2,5-呋喃二甲酸(FDCA)。在优化的操作条件下(pH 6.5、颗粒/酶比为 1.25:1.0 和戊二醛浓度为 4 mM),12.25 h 内 CaLB 在硅微球上的最大固定化收率为 82.4%。固定化 CaLB 用于合成烷基酯,然后将烷基酯与过氧化物一起用于 FDCA 合成。30 mM DFF 的生物催化转化在 30°C 下 48 h 内生成 77-79%的 FDCA;对于乙酸乙酯,固定化 CaLB 的转化率和转化频率分别为 6220.73 mol/mol 和 129.59 h,而对于丁酸乙酯,分别为 6297.65 mol/mol 和 131.2 h。考察操作稳定性时,固定化 CaLB 在五次 FDCA 生产循环中表现出很高的稳定性。