Khan Faheem Ullah, Khan Zia Ul Haq, Ma Junxian, Khan Arif Ullah, Sohail Muhammad, Chen Yongmei, Yang Yatao, Pan Xiaofang
College of Electronics and Information Engineering, Shenzhen University, Guangdong Province 518000, China.
Department of Environmental Sciences, COMSATS University Islamabad, Vehari Campus,61100, Pakistan.
Mater Sci Eng C Mater Biol Appl. 2021 Jan;118:111432. doi: 10.1016/j.msec.2020.111432. Epub 2020 Aug 22.
Nowadays featuring outstanding eco-friendliness, the phytochemical fabrication method of nanostructures is very popular. Here, we propose to utilize the Astragalus membranaceus extract as the reducing and capping agent to stabilize the metal and to avoid the aggregations of nanoparticles during ZnO nanoflowers synthesis procedure. As a result, the whole fabrication procedure was highly efficient and cost-effective without requiring a special environment of high pressure or elevated temperature and without chemical hazards used or produced. After the fabrication, detailed characterization about material morphology and crystal structure was carried out, including scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscope (FTIR). Moreover, the ZnO nanoflowers demonstrated distinctive antibacterial, antioxidant and electrochemical sensing effect. Specifically, ZnO nanoflowers had an antibacterial inhibition zone of 19(±0.7) and 15(±0.8) mm in diameter against the concentration of 50 μL (1 mg/mL) Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), which is greatly improved compared to the reference drug (Kanamycin). Besides, antioxidant activity was also tested using HO free radical scavenging assay and 60% 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition of 0.5 mg/mL was reported. Finally, controlled by the diffusion process during the charge transfer procedure, 4-nitorphenol was dramatically reduced and a limit of detection of 0.08 μM by ZnO nanoflowers modified electrode was observed during the cyclic voltammetry (CV) experiment. Because the phenolic compounds originating from Astragalus membranaceus helped to facilitate the electron transfer, the limit of detection was lower compared to other materials, such as copper oxide nanoparticles (CuO-NPs), silicon dioxide/silver nanoparticles (SiO/Ag-NPs), zinc oxide nanoparticles (ZnO-NPs), activated carbon (AC) and cobalt oxide nanocubes (CoO). Therefore, featuring easy operation, low-cost and eco-friendliness, our proposed ZnO nanoflowers fabrication method will have a great potential in biomedical and electro-catalytic fields.
如今,具有出色生态友好性的纳米结构植物化学制造方法非常流行。在此,我们提议利用黄芪提取物作为还原和封端剂来稳定金属,并在氧化锌纳米花的合成过程中避免纳米颗粒的聚集。结果,整个制造过程高效且具有成本效益,无需特殊的高压或高温环境,也不会使用或产生化学危害。制造完成后,对材料的形态和晶体结构进行了详细表征,包括扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和傅里叶变换红外光谱仪(FTIR)。此外,氧化锌纳米花表现出独特的抗菌、抗氧化和电化学传感效果。具体而言,氧化锌纳米花对浓度为50μL(1mg/mL)的大肠杆菌和金黄色葡萄球菌的抑菌圈直径分别为19(±0.7)和15(±0.8)mm,与参考药物(卡那霉素)相比有显著提高。此外,还使用羟基自由基清除试验测试了抗氧化活性,结果显示0.5mg/mL的样品对2,2-二苯基-1-苦基肼(DPPH)的抑制率为60%。最后,在循环伏安法(CV)实验中,受电荷转移过程中扩散过程的控制,4-硝基苯酚被显著还原,氧化锌纳米花修饰电极的检测限为0.08μM。由于源自黄芪的酚类化合物有助于促进电子转移,与其他材料如氧化铜纳米颗粒(CuO-NPs)、二氧化硅/银纳米颗粒(SiO/Ag-NPs)、氧化锌纳米颗粒(ZnO-NPs)、活性炭(AC)和氧化钴纳米立方体(CoO)相比,检测限更低。因此,我们提出的氧化锌纳米花制造方法操作简便、成本低且生态友好,在生物医学和电催化领域具有巨大潜力。