Vaidya Naman, Kumar Pravin, Pathak Karishma, Punia Sandhya K, Choudhary Ashish, Patnana Arun K
Department of Conservative Dentistry and Endodontics, Darshan Dental College and Hospital, Udaipur, India.
Department of Dentistry, All India Institute of Medical Sciences, Jodhpur, India.
J Int Soc Prev Community Dent. 2020 Sep 28;10(5):585-590. doi: 10.4103/jispcd.JISPCD_246_20. eCollection 2020 Sep-Oct.
This study aimed to evaluate the surface roughness of three flowable esthetic restorative materials after exposure to sports/energy drinks and alcoholic beverages.
A total of 210 specimens of dimension (2cm diameter and 2 mm thickness) with giomer, compomer, and composite (70 samples with each esthetic material) were made with the help of plastic rings. The prepared samples were tested in six experimental sports/energy drinks (beer, whiskey, vodka, Gatorade, Red Bull, and Sting) and distilled water was considered as the control group. Profilometric analyses of all samples were recorded before immersing into the experimental and control solutions. Then, the samples were stored in the experimental and control group solutions for 5min for 30 days. The profilometric analysis was repeated after 30 days and records were statistically analyzed.
Flowable composite showed the minimum surface roughness, whereas the flowable compomer showed the maximum surface roughness in the present test conditions. When the erosive potential of the test solutions was evaluated, surface roughness values were more for sports/energy drinks when compared to that of alcoholic beverages.
All the sports/energy drinks and alcoholic beverages evaluated in this study altered the surface roughness of the tested restorative materials. The effects ranged from slight to a markedly negative impact on the surface roughness of the test restorative materials.
本研究旨在评估三种可流动的美学修复材料在接触运动饮料/能量饮料和酒精饮料后的表面粗糙度。
借助塑料环制作了总共210个尺寸为（直径2cm和厚度2mm）的样本，其中包含玻璃离子增强复合树脂、复合体和复合树脂（每种美学材料70个样本）。将制备好的样本在六种实验性运动饮料/能量饮料（啤酒、威士忌、伏特加、佳得乐、红牛和激浪）中进行测试，蒸馏水作为对照组。在将所有样本浸入实验溶液和对照溶液之前，记录其轮廓测量分析结果。然后，将样本在实验组和对照组溶液中分别储存5分钟，持续30天。30天后重复进行轮廓测量分析，并对记录进行统计分析。
在当前测试条件下，可流动复合树脂的表面粗糙度最小，而可流动复合体的表面粗糙度最大。当评估测试溶液的侵蚀潜力时，与酒精饮料相比，运动饮料/能量饮料的表面粗糙度值更高。
本研究中评估的所有运动饮料/能量饮料和酒精饮料均改变了测试修复材料的表面粗糙度。这些影响对测试修复材料表面粗糙度的影响范围从轻微到明显负面。
