Department of Biomedical Engineering, University of California Davis, Davis, CA 95616, United States of America.
Department of Radiology, University of Massachusetts Medical School, Worcester, MA 01655, United States of America.
Phys Med Biol. 2021 Mar 2;66(6):065004. doi: 10.1088/1361-6560/abd5cd.
We are developing a multi-detector pinhole-based stationary brain-dedicated SPECT system: AdaptiSPECT-C. In this work, we introduced a new design prototype with multiple adaptable pinhole apertures for each detector to modulate the multiplexing by employing temporal shuttering of apertures. Temporal shuttering of apertures over the scan time provides the AdaptiSPECT-C with the capability of multiple-frame acquisition. We investigated, through analytic simulation, the impact of projection multiplexing on image quality using several digital phantoms and a customized anthropomorphic phantom emulating brain perfusion clinical distribution. The 105 pinholes in the collimator of the system were categorized into central, axial, and lateral apertures. We generated, through simulation, collimators of different multiplexing levels. Several data acquisition schemes were also created by changing the imaging time share of the acquisition frames. Sensitivity increased by 35% compared to the single-pinhole-per-detector base configuration of the AdaptiSPECT-C when using the central, axial, and lateral apertures with equal acquisition time shares within a triple-frame scheme with a high multiplexing scenario. Axial and angular sampling of the base configuration was enhanced by adding the axial and lateral apertures. We showed that the temporal shuttering of apertures can be exploited, trading the sensitivity, to modulate the multiplexing and to acquire a set of non-multiplexed non-truncated projections. Our results suggested that reconstruction benefited from utilizing both non-multiplexed projections and projections with modulated multiplexing resulting in a noticeably reduction in the multiplexing-induced image artefacts. Contrast recovery factor improved by 20% (9%) compared to the base configuration for a Defrise (hot-rod) phantom study when the central and axial (lateral) apertures with equal time shares were combined. The results revealed that, as an overall trend at each simulated multiplexing level, lowest normalized root-mean-square errors for the brain gray-matter regions were achieved with the combined usage of the central apertures and axial/lateral apertures.
我们正在开发一种基于多探头针孔的固定专用脑 SPECT 系统:AdaptiSPECT-C。在这项工作中,我们引入了一种新的设计原型,每个探测器都有多个可适应的针孔,通过孔径的时间快门来调制复用。在扫描时间内对孔径进行时间快门,可以使 AdaptiSPECT-C 具有多帧采集的能力。我们通过分析模拟,使用几个数字体模和一个模拟脑灌注临床分布的定制拟人化体模,研究了投影复用对图像质量的影响。系统准直器中的 105 个针孔被分为中央、轴向和侧向孔。我们通过模拟生成了不同复用水平的准直器。通过改变采集帧的成像时间分配,还创建了几种数据采集方案。与 AdaptiSPECT-C 的单个针孔/探测器基础配置相比,当在三重帧方案中使用具有高复用场景的中央、轴向和侧向孔时,采用相等的采集时间共享,灵敏度提高了 35%。通过添加轴向和侧向孔,增强了基础配置的轴向和角度采样。我们表明,孔径的时间快门可以被利用,以换取灵敏度,从而调制复用并获取一组非复用的非截断投影。我们的结果表明,重建受益于利用非复用投影和调制复用的投影,从而明显减少了复用引起的图像伪影。与基础配置相比,在 Defrise(热棒)体模研究中,当中央和轴向(侧向)孔采用相等的时间共享时,对比恢复因子提高了 20%(9%)。结果表明,作为每个模拟复用水平的总体趋势,在大脑灰质区域实现了最低的归一化均方根误差,这是通过联合使用中央孔和轴向/侧向孔实现的。