Suppr超能文献

圆锥角膜和正常眼中通过Corvis ST和UHR-OCT测量的角膜生物力学参数与角膜各层厚度之间的关系。

Relationship between corneal biomechanical parameters and corneal sublayer thickness measured by Corvis ST and UHR-OCT in keratoconus and normal eyes.

作者信息

Li Yong, Xu Zhiqiang, Liu Qiaoli, Wang Yuzhou, Lin Kan, Xia Jiahui, Chen Shihao, Hu Liang

机构信息

School of Ophthalmology and Optometry, Eye Hospital, Wenzhou Medical University, 270 Xueyuan road, Wenzhou, 325000, Zhejiang, China.

National Clinical Research Center for Ocular Diseases, Wenzhou, Zhejiang, China.

出版信息

Eye Vis (Lond). 2021 Jan 8;8(1):2. doi: 10.1186/s40662-020-00225-z.

Abstract

BACKGROUND

To explore the relationship between corneal biomechanical parameters and corneal sublayer thickness using corneal visualization Scheimpflug technology (Corvis ST) and ultrahigh-resolution optical coherence tomography (UHR-OCT) in clinical and suspected keratoconus and normal eyes.

METHODS

Cross-sectional prospective study. A total of 94 eyes of 70 participants were recruited. Twenty five eyes of 19 keratoconus patients, 52 eyes of 34 patients showing high risk of developing keratoconus according to the Belin/Ambrosio Enhanced Ectasia Display, and each eye of 17 normal subjects were enrolled. All participants underwent Corvis ST, Pentacam, and UHR-OCT examinations at the same time. Stiffness parameter A1 (SP-A1), deformation amplitude ratio (DA ratio), and other biomechanical parameters were recorded using Corvis ST. The vertical and horizontal thickness profiles of central 3 mm corneal epithelium, Bowman's layer, and stroma as measured by the perpendicular distance between the neighboring interfaces were generated using UHR-OCT. The flat keratometry and steep keratometry were obtained using Pentacam. Analysis of correlation was applied to explore the association between variables.

RESULTS

Most of the biomechanical parameters and corneal sublayer thickness profiles showed statistical differences among three groups. A statistically significant linear relationship was noted between SP-A1 and DA ratio in all three groups. SP-A1 was found to be positively correlated with epithelial and Bowman's layer thickness in the keratoconus (KC) group, and with stromal thickness in all three groups. In the normal and suspected keratoconus (SKC) groups, only stromal thickness was included in the stepwise linear regression to predict SP-A1, whereas in the KC group, steep keratometry and Bowman's layer thickness were included.

CONCLUSIONS

Significant and different correlations were noted between corneal stiffness and corneal sublayer thickness in different groups, indicating that corneal sublayers may play different roles in maintaining corneal biomechanical stability between keratoconus and normal eyes.

摘要

背景

利用角膜可视化Scheimpflug技术(Corvis ST)和超高分辨率光学相干断层扫描(UHR-OCT),在临床诊断及疑似圆锥角膜患者和正常眼中,探讨角膜生物力学参数与角膜各层厚度之间的关系。

方法

横断面前瞻性研究。共纳入70名参与者的94只眼。其中包括19例圆锥角膜患者的25只眼、根据贝林/安布罗西奥增强型扩张显示判定为圆锥角膜高危的34例患者的52只眼,以及17名正常受试者的每只眼。所有参与者同时接受Corvis ST、Pentacam和UHR-OCT检查。使用Corvis ST记录硬度参数A1(SP-A1)、变形幅度比(DA比)及其他生物力学参数。利用UHR-OCT生成中央3毫米角膜上皮、Bowman层和基质的垂直和水平厚度剖面图,测量相邻界面之间的垂直距离。使用Pentacam获得平坦角膜曲率和陡峭角膜曲率。应用相关性分析来探讨变量之间的关联。

结果

大多数生物力学参数和角膜各层厚度剖面图在三组之间存在统计学差异。在所有三组中,SP-A1与DA比之间均存在显著的线性关系。在圆锥角膜(KC)组中,SP-A1与上皮和Bowman层厚度呈正相关,在所有三组中均与基质厚度呈正相关。在正常和疑似圆锥角膜(SKC)组中,逐步线性回归中仅纳入基质厚度来预测SP-A1,而在KC组中,纳入了陡峭角膜曲率和Bowman层厚度。

结论

不同组中角膜硬度与角膜各层厚度之间存在显著且不同的相关性,表明在圆锥角膜和正常眼之间,角膜各层在维持角膜生物力学稳定性方面可能发挥不同作用。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/e9e4/7796648/4aa868d0d2db/40662_2020_225_Fig1_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验