Kim Tae-Wook, Oh Jaewon, Min Cheonhong, Hwang Se-Yun, Kim Min-Seok, Lee Jang-Hyun
Offshore Industries R&BD Center, Korea Research Institute of Ships & Ocean Engineering (KRISO), 1350 Geojebuk-ro, Jangmok-myeon, Gyeongsangnam-do, Geoje-si 53201, Korea.
Research Institute of Industrial Technology, INHA University, 100 Inha-ro, Michuhol-gu, Incheon 22212, Korea.
Sensors (Basel). 2021 Jan 11;21(2):457. doi: 10.3390/s21020457.
In order to utilize wave energy, various wave power systems are being actively researched and developed and interest in them is increasing. To maximize the operational efficiency, it is very important to monitor and maintain the fault of components of the system. In recent years, interest in the management cost, high reliability and facility utilization of such systems has increased. In this regard, fault diagnosis technology including fault factor analysis and fault reproduction is drawing attention as an important main technology. Therefore, in this study, to reproduce and monitor the faults of a wave power system, firstly, the failure mode of the system was analyzed using FMEA analysis. Secondly, according to the derived failure mode and effect, the thrust bearing was selected as a target for fault reproduction and a test equipment bench was constructed. Finally, with the vibration data obtained by conducting the tests, the vibration spectrum was analyzed to extract the features of the data for each operating status; the data was classified by applying the three machine learning algorithms: naïve Bayes (NB), k-nearest neighbor (k-NN), and multi-layer perceptron (MLP). The criteria for determining the fault were derived. It is estimated that a more efficient fault diagnosis is possible by using the standard and fault monitoring method of this study.
为了利用波浪能,各种波浪能发电系统正在积极地研究和开发,并且人们对它们的兴趣也在增加。为了使运行效率最大化,监测和维护系统部件的故障非常重要。近年来,人们对这类系统的管理成本、高可靠性和设备利用率的关注度有所提高。在这方面,包括故障因素分析和故障再现的故障诊断技术作为一项重要的关键技术正受到关注。因此,在本研究中,为了再现和监测波浪能发电系统的故障,首先,使用故障模式与影响分析(FMEA)对系统的故障模式进行了分析。其次,根据推导得出的故障模式和影响,选择推力轴承作为故障再现的目标,并构建了一个测试设备台架。最后,利用测试获得的振动数据,对振动频谱进行分析,以提取每种运行状态下数据的特征;通过应用朴素贝叶斯(NB)、k近邻(k-NN)和多层感知器(MLP)这三种机器学习算法对数据进行分类。得出了确定故障的标准。据估计,使用本研究的标准和故障监测方法可以实现更高效的故障诊断。