Catalytically Active Site Identification of Molybdenum Disulfide as Gas Cathode in a Nonaqueous Li-CO Battery.

Li-CO batteries have recently attracted attention as promising candidates for next-generation energy storage devices due to their extremely high theoretical energy density. The real application of Li-CO cells involves addressing several drawbacks, including high charging potential, poor coulombic efficiency, and low rechargeability. Molybdenum disulfide supported on carbon nanotubes (MoS/CNT) with various ratios functioned as a cathode catalyst for Li-CO batteries. The optimal MoS/CNT composite achieved a maximum discharge capacity of 8551 mAh g with a coulombic efficiency of 96.7%. This hybrid also obtained an initial charging plateau of 3.87 V at a current density of 100 mA g with a cutoff capacity of 500 mAh g. It provided ideal electrochemical stability of 142 cycles at the current densities of 100 mA g, which was comparable with that of some precious metal catalysts. This optimized MoS/CNT was also cycled at 200 and 400 mA g for 112 and 55 times, respectively. Density functional theory calculations demonstrated that the sulfided Mo-edge (s-Mo-edge) on MoS materials showed appropriate adsorption strengths of Li, CO, and LiCO. Moreover, joint results of Raman profiles and extended X-ray absorption fine structure spectra elucidated that the catalytic efficiencies of MoS/CNT hybrids were proportional to the quantities of exposed s-Mo-edge active sites.