Department of Physical Chemistry, Institute of Chemistry, University of Campinas - UNICAMP, P.O. Box 6154, 13083-970 Campinas, SP, Brazil.
Department of Physical Chemistry, Institute of Chemistry, University of Campinas - UNICAMP, P.O. Box 6154, 13083-970 Campinas, SP, Brazil.
Mater Sci Eng C Mater Biol Appl. 2021 Jan;120:111759. doi: 10.1016/j.msec.2020.111759. Epub 2020 Nov 27.
The sol-gel method is versatile and one of the well-established synthetic approaches for preparing bioactive glass with improved microstructure. In a successful approach, alkoxide precursors undergo rapid hydrolysis, followed by immediate condensation leading to the formation of three-dimensional gels. On the other hand, a slow kinetics rate for hydrolysis of one or more alkoxide precursors generates a mismatch in the progression of the consecutive reactions of the sol-gel process, which makes it difficult to form homogeneous multicomponent glass products. The amorphous phase separation (APS) into the gel is thermodynamically unstable and tends to transform into a crystalline form during the calcination step of xerogel. In the present study, we report a combined experimental and theoretical method to investigate the stability towards hydrolysis of triethyl phosphate (TEP) and its effects on the mechanism leading to phase separation in 58S bioactive glass obtained via sol-gel route. A multitechnical approach for the experimental characterization combined with calculations of functional density theory (DFT) suggest that TEP should not undergo hydrolysis by water under acidic conditions during the formation of the sol or even in the gel phase. The activation energy barrier (ΔG) showed a height of about 20 kcal·mol for the three stages of hydrolysis and the reaction rates calculated for each stage of TEP hydrolysis were k = 7.0 × 10s, k = 6.8 × 10s and k = 3.5 × 10s. These results show that TEP remains in the non-hydrolyzed form segregated within the xerogel matrix until its thermal decomposition in the calcination step, when P species preferentially associate with calcium ions (labile species) and other phosphate groups present nearby, forming crystalline domains of calcium pyrophosphates permeated by the silica-rich glass matrix. Together, our data expand the knowledge about the synthesis by the sol-gel method of bioactive glass and establishes a mechanism that explains the role played by the precursor source of phosphorus (TEP) in the phase separation, an event commonly observed for these biomaterials.
溶胶-凝胶法是一种通用且成熟的合成方法,可用于制备具有改善微观结构的生物活性玻璃。在成功的方法中,烷氧基前体经历快速水解,随后立即缩合,导致三维凝胶的形成。另一方面,一个或多个烷氧基前体的水解动力学速率较慢会导致溶胶-凝胶过程的连续反应进展不匹配,从而难以形成均匀的多组分玻璃产品。凝胶中的非晶相分离(APS)在热力学上是不稳定的,并且在干凝胶的煅烧步骤中倾向于转化为晶相。在本研究中,我们报告了一种组合的实验和理论方法,用于研究三乙膦酸酯(TEP)的水解稳定性及其对通过溶胶-凝胶途径获得的 58S 生物活性玻璃中相分离机制的影响。一种用于实验表征的多技术方法与功能密度理论(DFT)的计算相结合表明,TEP 不应该在溶胶形成过程中甚至在凝胶相中在酸性条件下水解。水解的三个阶段的活化能势垒(ΔG)显示约为 20 kcal·mol,计算出的每个 TEP 水解阶段的反应速率为 k = 7.0×10s,k = 6.8×10s 和 k = 3.5×10s。这些结果表明,TEP 保持在非水解形式中,在干凝胶基质中分离,直到其在煅烧步骤中热分解,此时磷物种优先与钙离子(不稳定物种)和附近存在的其他磷酸基团结合,形成富含磷的玻璃基质渗透的焦磷酸钙结晶域。总之,我们的数据扩展了关于溶胶-凝胶法合成生物活性玻璃的知识,并建立了一种机制,该机制解释了磷前体源(TEP)在相分离中所起的作用,这是这些生物材料中常见的事件。