Kammerer Jochen A, Duan Xiaoyang, Neubrech Frank, Schröder Rasmus R, Liu Na, Pfannmöller Martin
3DMM2O, Cluster of Excellence (EXC-2082/1 - 390761711) and CAM - Centre for Advanced Materials, Heidelberg University, Im Neuenheimer Feld 225, Heidelberg, 69120, Germany.
MPI - Max Planck Institute for Solid State Research, Stuttgart, 70569, Germany.
Adv Mater. 2021 Mar;33(11):e2008259. doi: 10.1002/adma.202008259. Epub 2021 Feb 8.
Reversible hydrogen uptake and the metal/dielectric transition make the Mg/MgH system a prime candidate for solid-state hydrogen storage and dynamic plasmonics. However, high dehydrogenation temperatures and slow dehydrogenation hamper broad applicability. One promising strategy to improve dehydrogenation is the formation of metastable γ-MgH . A nanoparticle (NP) design, where γ-MgH forms intrinsically during hydrogenation is presented and a formation mechanism based on transmission electron microscopy results is proposed. Volume expansion during hydrogenation causes compressive stress within the confined, anisotropic NPs, leading to plastic deformation of β-MgH via (301) twinning. It is proposed that these twins nucleate γ-MgH nanolamellas, which are stabilized by residual compressive stress. Understanding this mechanism is a crucial step toward cycle-stable, Mg-based dynamic plasmonic and hydrogen-storage materials with improved dehydrogenation. It is envisioned that a more general design of confined NPs utilizes the inherent volume expansion to reform γ-MgH during each rehydrogenation.
可逆的氢吸收和金属/电介质转变使Mg/MgH体系成为固态储氢和动态等离子体学的主要候选材料。然而,高脱氢温度和缓慢的脱氢过程阻碍了其广泛应用。一种有前景的改善脱氢的策略是形成亚稳态的γ-MgH。本文提出了一种纳米颗粒(NP)设计,即在氢化过程中自然形成γ-MgH,并基于透射电子显微镜结果提出了一种形成机制。氢化过程中的体积膨胀会在受限的各向异性纳米颗粒内产生压应力,导致β-MgH通过(301)孪晶发生塑性变形。有人提出,这些孪晶会形成γ-MgH纳米薄片,并通过残余压应力使其稳定。了解这一机制是迈向具有循环稳定性、基于镁的动态等离子体和储氢材料且脱氢性能得到改善的关键一步。可以设想,一种更通用的受限纳米颗粒设计利用固有的体积膨胀在每次再氢化过程中重新形成γ-MgH。