Alternative radiopacifiers for polymethyl methacrylate bone cements: Silane-treated anatase titanium dioxide and yttria-stabilised zirconium dioxide.

Poly (methyl methacrylate) (PMMA) bone cement is widely used for anchoring joint arthroplasties. In cement brands approved for these procedures, micron-sized particles (usually barium sulphate, BaSO) act as the radiopacifier. It has been postulated that these particles act as sites for crack initiation and subsequently cement fatigue. This study investigated whether alternative radiopacifiers, anatase titanium dioxide (TiO) and yttria-stabilised zirconium dioxide (ZrO), could improve the mechanical, fatigue crack propagation and biological properties of polymethyl methacrylate (PMMA) bone cement and whether their coating with a silane could further enhance cement performance. Cement samples containing 0, 5, 10, 15, 20 and 25%w/w TiO or ZrO and 10%w/w silane-treated TiO or ZrO were prepared and characterised in terms of radiopacity, compressive and bending strength, bending modulus, fatigue crack propagation, hydroxyapatite forming ability and MC3T3-E1 cell attachment and viability. Cement samples with greater than 10%w/w TiO and ZrO had a similar radiopacity to the control 10%w/w BaSO cement and commercial products. The addition of TiO and ZrO to bone cement reduced the bending strength and fracture toughness and increased fatigue crack propagation due to the formation of agglomerations and voids. Silane treating TiO reversed this effect, enhancing the dispersion and adhesion of particles to the PMMA matrix and resulted in improved mechanical properties and fatigue crack propagation resistance. Silane-treated TiO cements had increased nucleation of hydroxyapatite and MC3T3-E1 cell attachment , without significantly compromising cell viability. This research has demonstrated that 10%w/w silane-treated anatase TiO is a promising alternative radiopacifier for PMMA bone cement offering additional benefits over conventional BaSO radiopacifiers.