Departmento de Termodinámica Aplicada. Escuela Técnica Superior de Ingenieros Industriales (ETSII), Universitat Politécnica de Valencia, Campus de Vera s / n, 46020 Valencia, Spain.
Department de Física, Universitat Jaume I- 12080, Castellon, Spain.
J Optom. 2022 Apr-Jun;15(2):160-174. doi: 10.1016/j.optom.2020.12.002. Epub 2021 Feb 13.
The study of oxygen consumption rate under" in vivo" human cornea during contact lens wear has been technically a challenge and several attempts have been made in the last 20 years to model the physiology of the human cornea during contact lens wear. Unfortunately, some of these models, based on a constant corneal oxygen consumption rate, produce areas on the cornea where the oxygen tension is negative, which has no physical sense. In order to avoid such inconsistency, different researchers have developed alternative models of oxygen consumption, which predict the likely oxygen metrics available at the interface cornea/post lens tear film by determination of oxygen flux, oxygen consumption, and oxygen tension through the different layers (endothelium, stroma, and epithelium). Although oxygen deficiency produces corneal edema, corneal swelling, hypoxia, acidosis, and other abnormalities, the estimation of the oxygen distribution below the impact of a contact lens wear is interesting to know which lens transmissibility was adequate to maintain the cornea and avoid epithelial and stromal anoxia. The estimation of minimum transmissibility for a lens for extended wear applications will be very useful for both clinicians and manufacturers. The aim of this work is to present a complete discussion based on Monod kinetics model that permits give an estimation of oxygen partial pressure distribution, the profile distribution of corneal flux and oxygen consumption rate, and finally the estimation of the relaxation mechanism of the cornea depending on the oxygen tension at the interface cornea/post lens tear film. Relaxation time in this context can quantify the capability of the corneal tissue to adapt to increasing concentrations of oxygen. It is proposed this parameter as a biological meaningful indicator of the interaction between contact lens polymers and living tissues such as the corneal cellular layer.
研究在接触镜佩戴期间人体角膜的耗氧率在技术上一直是一个挑战,在过去的 20 年中,人们已经尝试了几种方法来模拟接触镜佩戴期间人眼角膜的生理学。不幸的是,这些模型中的一些,基于角膜耗氧率不变,会导致角膜上的一些区域的氧张力为负值,这是没有物理意义的。为了避免这种不一致,不同的研究人员已经开发了替代的耗氧模型,通过确定氧通量、氧消耗和通过不同层(内皮、基质和上皮)的氧张力来预测角膜/后泪膜界面处可能的氧指标。虽然缺氧会导致角膜水肿、肿胀、缺氧、酸中毒和其他异常,但了解接触镜佩戴对角膜下氧分布的影响是很有趣的,因为这可以知道哪种镜片的透过率足以维持角膜并避免上皮和基质缺氧。对于延长佩戴应用的镜片,估计其最低透过率对于临床医生和制造商都非常有用。本工作的目的是基于 Monod 动力学模型进行全面讨论,该模型允许对氧分压分布、角膜通量和耗氧率的轮廓分布进行估计,最后根据角膜/后泪膜界面处的氧张力估计角膜的弛豫机制。在这种情况下,弛豫时间可以量化角膜组织适应氧浓度增加的能力。建议将该参数作为接触镜聚合物与角膜细胞层等活组织相互作用的生物有意义的指标。