Suppr超能文献

嵌入镍钴纳米颗粒的莲藕状碳纤维用于无枝晶锂金属阳极

Lotus-Root-Like Carbon Fibers Embedded with Ni-Co Nanoparticles for Dendrite-Free Lithium Metal Anodes.

作者信息

Chen Chen, Guan Jun, Li Nian Wu, Lu Yue, Luan Deyan, Zhang Cai Hong, Cheng Guang, Yu Le, Lou Xiong Wen David

机构信息

State Key Lab of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing, 100029, P. R. China.

College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing, 100029, P. R. China.

出版信息

Adv Mater. 2021 Jun;33(24):e2100608. doi: 10.1002/adma.202100608. Epub 2021 May 7.

Abstract

The growth of lithium (Li) dendrites and the huge volume change are the critical issues for the practical applications of Li-metal anodes. In this work, a spatial control strategy is proposed to address the above challenges using lotus-root-like Ni-Co hollow prisms@carbon fibers (NCH@CFs) as the host. The homogeneously distributed bimetallic Ni-Co particles on the N-doped carbon fibers serve as nucleation sites to effectively reduce the overpotential for Li nucleation. Furthermore, the 3D conductive network can alter the electric field. More importantly, the hierarchical lotus-root-like hollow fibers provide sufficient void space to withstand the volume expansion during Li deposition. These structural features guide the uniform Li nucleation and non-dendritic growth. As a result, the NCH@CFs host enables a very stable Li metal anode with a low voltage hysteresis during repeated Li plating/stripping for 1200 h at a current density of 1 mA cm .

摘要

锂枝晶的生长和巨大的体积变化是锂金属负极实际应用中的关键问题。在这项工作中,提出了一种空间控制策略,以使用莲藕状的镍钴空心棱柱@碳纤维(NCH@CFs)作为主体来应对上述挑战。在氮掺杂碳纤维上均匀分布的双金属镍钴颗粒作为成核位点,有效降低了锂成核的过电位。此外,三维导电网络可以改变电场。更重要的是,分层的莲藕状中空纤维提供了足够的空隙空间来承受锂沉积过程中的体积膨胀。这些结构特征引导锂均匀成核和非枝晶生长。因此,NCH@CFs主体能够实现非常稳定的锂金属负极,在1 mA cm 的电流密度下进行1200小时的反复锂电镀/剥离过程中具有低电压滞后。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验