Department of Physiology and Biophysics, Dalhousie University, PO Box 15000, Halifax, NS, B3H 4R2, Canada.
Cell Mol Life Sci. 2021 Jun;78(12):5213-5223. doi: 10.1007/s00018-021-03859-x. Epub 2021 May 23.
Positively charged amino acid side-chains play important roles in anion binding and permeation through the CFTR chloride channel. One pore-lining lysine residue in particular (K95) has been shown to be indispensable for anion binding, conductance, and selectivity. Here, we use functional investigation of CFTR to show that a nearby arginine (R134) plays a functionally analogous role. Removal of this positive charge (in the R134Q mutant) drastically reduces single-channel conductance, weakens binding of both permeant and blocking anions, and abolishes the normal anion conductance selectivity pattern. Each of these functional effects was reversed by a second-site mutation (S1141K) that introduces an ectopic positive charge to a nearby pore-lining residue. Substituted cysteine accessibility experiments confirm that R134-but not nearby residues in the same transmembrane helix-is accessible within the pore lumen. These results suggest that K95 and R134, which are very close together within the inner vestibule of the pore, play analogous, important roles, and that both are required for the normal anion binding and anion conductance properties of the pore. Nevertheless, that fact that both positive charges can be "transplanted" to other sites in the inner vestibule with little effect on channel permeation properties indicates that it is the overall number of charges-rather than their exact locations-that controls pore function.
带正电荷的氨基酸侧链在阴离子结合和通过 CFTR 氯离子通道渗透中发挥重要作用。特别是一个位于孔道内的赖氨酸残基(K95)对于阴离子结合、电导和选择性是不可或缺的。在这里,我们使用 CFTR 的功能研究表明,附近的精氨酸(R134)发挥了类似的功能。去除这个正电荷(在 R134Q 突变体中)会大大降低单通道电导,削弱可渗透和阻塞阴离子的结合,并且消除正常的阴离子电导选择性模式。这些功能影响中的每一个都可以通过引入另一个孔道内的异位正电荷的第二位置突变(S1141K)来逆转。取代的半胱氨酸可及性实验证实,R134-而不是同一跨膜螺旋中的附近残基-在孔腔内是可及的。这些结果表明,K95 和 R134 在孔内的内前庭内非常接近,发挥类似的重要作用,并且两者对于孔的正常阴离子结合和阴离子电导特性都是必需的。然而,事实上,这两个正电荷都可以“移植”到内前庭的其他部位,对通道渗透特性几乎没有影响,这表明控制孔功能的是电荷的总数,而不是它们的确切位置。