Lepedda Antonio Junior, Nieddu Gabriele, Formato Marilena, Baker Matthew Brandon, Fernández-Pérez Julia, Moroni Lorenzo
Department of Biomedical Sciences, University of Sassari, Sassari, Italy.
Complex Tissue Regeneration Department, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht, Netherlands.
Front Chem. 2021 May 18;9:680836. doi: 10.3389/fchem.2021.680836. eCollection 2021.
Cardiovascular diseases represent the number one cause of death globally, with atherosclerosis a major contributor. Despite the clinical need for functional arterial substitutes, success has been limited to arterial replacements of large-caliber vessels (diameter > 6 mm), leaving the bulk of demand unmet. In this respect, one of the most challenging goals in tissue engineering is to design a "bioactive" resorbable scaffold, analogous to the natural extracellular matrix (ECM), able to guide the process of vascular tissue regeneration. Besides adequate mechanical properties to sustain the hemodynamic flow forces, scaffold's properties should include biocompatibility, controlled biodegradability with non-toxic products, low inflammatory/thrombotic potential, porosity, and a specific combination of molecular signals allowing vascular cells to attach, proliferate and synthesize their own ECM. Different fabrication methods, such as phase separation, self-assembly and electrospinning are currently used to obtain nanofibrous scaffolds with a well-organized architecture and mechanical properties suitable for vascular tissue regeneration. However, several studies have shown that naked scaffolds, although fabricated with biocompatible polymers, represent a poor substrate to be populated by vascular cells. In this respect, surface functionalization with bioactive natural molecules, such as collagen, elastin, fibrinogen, silk fibroin, alginate, chitosan, dextran, glycosaminoglycans (GAGs), and growth factors has proven to be effective. GAGs are complex anionic unbranched heteropolysaccharides that represent major structural and functional ECM components of connective tissues. GAGs are very heterogeneous in terms of type of repeating disaccharide unit, relative molecular mass, charge density, degree and pattern of sulfation, degree of epimerization and physicochemical properties. These molecules participate in a number of vascular events such as the regulation of vascular permeability, lipid metabolism, hemostasis, and thrombosis, but also interact with vascular cells, growth factors, and cytokines to modulate cell adhesion, migration, and proliferation. The primary goal of this review is to perform a critical analysis of the last twenty-years of literature in which GAGs have been used as molecular cues, able to guide the processes leading to correct endothelialization and neo-artery formation, as well as to provide readers with an overall picture of their potential as functional molecules for small-diameter vascular regeneration.
心血管疾病是全球头号死因,动脉粥样硬化是主要诱因。尽管临床上需要功能性动脉替代物,但成功案例仅限于大口径血管(直径>6毫米)的动脉置换,大量需求仍未得到满足。在这方面,组织工程中最具挑战性的目标之一是设计一种“生物活性”可吸收支架,类似于天然细胞外基质(ECM),能够引导血管组织再生过程。除了具备维持血流动力学力量的适当机械性能外,支架的性能还应包括生物相容性、可控制的生物降解性且产生无毒产物、低炎症/血栓形成潜力、孔隙率,以及分子信号的特定组合,以允许血管细胞附着、增殖并合成自身的ECM。目前使用不同的制造方法,如相分离、自组装和静电纺丝,来获得具有良好组织结构和适合血管组织再生机械性能的纳米纤维支架。然而,多项研究表明,裸支架尽管由生物相容性聚合物制造,但对于血管细胞来说是不良的附着基质。在这方面,用生物活性天然分子进行表面功能化已被证明是有效的,这些分子包括胶原蛋白、弹性蛋白、纤维蛋白原、丝素蛋白、藻酸盐、壳聚糖、葡聚糖、糖胺聚糖(GAGs)和生长因子。GAGs是复杂的阴离子无分支杂多糖,是结缔组织主要的结构和功能ECM成分。GAGs在重复二糖单元类型、相对分子质量、电荷密度、硫酸化程度和模式、差向异构化程度以及物理化学性质方面非常异质。这些分子参与许多血管事件,如血管通透性调节、脂质代谢、止血和血栓形成,还与血管细胞、生长因子和细胞因子相互作用,以调节细胞粘附、迁移和增殖。本综述的主要目标是对过去二十年中使用GAGs作为分子线索的文献进行批判性分析,这些线索能够引导导致正确内皮化和新动脉形成的过程,并为读者提供其作为小口径血管再生功能分子潜力的总体情况。