Department of Removable Prosthodontics and Occlusion, Osaka Dental University, 8-1 Kuzuha-hanazono-cho, Hirakata, Osaka 573-1121, Japan.
Department of Japan Faculty of Health Sciences, Osaka Dental University, 1-4-4, Makino-honmachi, Hirakata-shi, Osaka 573-1121, Japan.
Int J Mol Sci. 2021 Jul 16;22(14):7617. doi: 10.3390/ijms22147617.
In this paper, we suggest that the atmospheric pressure plasma treatment of pure titanium metal may be useful for improving the ability of rat bone marrow cells (RBMCs) to induce hard tissue differentiation. Previous studies have reported that the use of argon gas induces a higher degree of hard tissue formation. Therefore, this study compares the effects of plasma treatment with argon gas on the initial adhesion ability and hard tissue differentiation-inducing ability of RBMCs. A commercially available titanium metal plate was used as the experimental material. A plate polished using water-resistant abrasive paper #1500 was used as the control, and a plate irradiated with argon mixed with atmospheric pressure plasma was used as the experimental plate. No structural change was observed on the surface of the titanium metal plate in the scanning electron microscopy results, and no change in the surface roughness was observed via scanning probe microscopy. X-ray photoelectron spectroscopy showed a decrease in the carbon peak and the formation of hydroxide in the experimental group. In the distilled water drop test, a significant decrease in the contact angle was observed for the experimental group, and the results indicated superhydrophilicity. Furthermore, the bovine serum albumin adsorption, initial adhesion of RBMCs, alkaline phosphatase activity, calcium deposition, and genetic marker expression of rat bone marrow cells were higher in the experimental group than those in the control group at all time points. Rat distal femur model are used as in vivo model. Additionally, microcomputed tomography analysis showed significantly higher results for the experimental group, indicating a large amount of the formed hard tissue. Histopathological evaluation also confirmed the presence of a prominent newly formed bone seen in the images of the experimental group. These results indicate that the atmospheric pressure plasma treatment with argon gas imparts superhydrophilicity, without changing the properties of the pure titanium plate surface. It was also clarified that it affects the initial adhesion of bone marrow cells and the induction of hard tissue differentiation.
在本论文中,我们提出,对纯钛金属的常压等离子体处理可能有助于提高大鼠骨髓细胞(RBMC)诱导硬组织分化的能力。先前的研究报告称,使用氩气可诱导更高程度的硬组织形成。因此,本研究比较了等离子体处理与氩气对 RBMC 初始黏附能力和诱导硬组织分化能力的影响。使用市售的钛金属板作为实验材料。使用经耐水研磨纸#1500 抛光的板作为对照,使用与大气压等离子体混合的氩气辐照的板作为实验组。扫描电子显微镜结果显示钛金属板表面无结构变化,扫描探针显微镜显示表面粗糙度无变化。X 射线光电子能谱显示实验组的碳峰减少且形成了氢氧化物。在蒸馏水滴落测试中,实验组的接触角显著降低,表现出超亲水性。此外,实验组的牛血清白蛋白吸附、RBMC 的初始黏附、碱性磷酸酶活性、钙沉积以及大鼠骨髓细胞的遗传标志物表达均在所有时间点均高于对照组。大鼠股骨远端模型被用作体内模型。此外,微计算机断层扫描分析显示实验组的结果明显更高,表明形成的大量硬组织。组织病理学评估也证实了实验组图像中存在明显的新形成的骨。这些结果表明,大气压等离子体处理赋予了超亲水性,同时不改变纯钛板表面的性质。此外,它还影响骨髓细胞的初始黏附和硬组织分化的诱导。