Glasgow Caledonian University, Cowcaddens Road, Glasgow G4 0BA, Scotland, United Kingdom.
The James Hutton Institute, Cragiebuckler, Aberdeen AB15 8QH, Scotland, United Kingdom.
Environ Toxicol Chem. 2021 Dec;40(12):3275-3298. doi: 10.1002/etc.5191. Epub 2021 Oct 1.
Antibiotics in the aquatic environment is a major problem because of the emergence of antibiotic resistance. The long-term ecological impact on the aquatic environment is unknown. Many sources allow entry of antibiotics into the environment, including wastewater-treatment plants (WWTPs), agricultural runoff, hospital effluent, and landfill leachate. Concentrations of antibiotics in the aquatic environment vary significantly; studies have shown fluoroquinolones, tetracycline, macrolides, sulfonamides, and penicillins to reach 2900, 1500, 9700, 21 400, and 1600 ng L in wastewater effluent samples, respectively. However, concentrations are highly variable between different countries and depend on several factors including seasonal variation, prescription, and WWTP operating procedures. Likewise, the reported concentrations that cause environmental effects vary greatly between antibiotics, even within the same class; however, this predicted concentration for the antibiotics considered was frequently <1000 ngL , indicating that when discharged into the environment along with treated effluent, these antibiotics have a potentially detrimental effect on the environment. Antibiotics are generally quite hydrophilic in nature; however, they can ionize in the aquatic environment to form charged structures, such as cations, zwitterions, and anions. Certain classes, particularly fluoroquinolones and tetracyclines, can adsorb onto solid matrices, including soils, sediment, and sludge, making it difficult to fully understand their chemical fate in the aquatic environment. The adsorption coefficient (K ) varies between different classes of antibiotics, with tetracyclines and fluoroquinolones showing the highest K values. The K values for fluoroquinolones, tetracyclines, macrolides, and sulfonamides have been reported as 54 600, 7600, 130, and 1.37 L kg , respectively. Factors such as pH of the environment, solid matrix (sediment/soil sludge), and ionic strength can influence the K ; therefore, several values exist in literature for the same compound. Environ Toxicol Chem 2021;40:3275-3298. © 2021 SETAC.
抗生素在水生环境中是一个主要问题,因为抗生素耐药性的出现。其对水生环境的长期生态影响尚不清楚。许多来源允许抗生素进入环境,包括废水处理厂 (WWTP)、农业径流、医院污水和垃圾渗滤液。抗生素在水生环境中的浓度差异很大;研究表明,氟喹诺酮类、四环素类、大环内酯类、磺胺类和青霉素类抗生素在废水流出物样本中的浓度分别达到 2900、1500、9700、21400 和 1600ng/L。然而,不同国家之间的浓度差异很大,取决于季节性变化、处方和 WWTP 操作程序等因素。同样,即使在同一类别内,引起环境效应的报告浓度也因抗生素而异;然而,对于所考虑的抗生素,预测浓度通常<1000ng/L,这表明当与处理后的废水一起排放到环境中时,这些抗生素对环境可能产生有害影响。抗生素在性质上通常具有很强的亲水性;然而,它们可以在水生环境中离子化形成带电结构,如阳离子、两性离子和阴离子。某些类别,特别是氟喹诺酮类和四环素类,可以吸附到土壤、沉积物和污泥等固体基质上,这使得很难完全了解它们在水生环境中的化学命运。吸附系数 (Kd) 在不同类别的抗生素之间有所不同,其中四环素类和氟喹诺酮类的 Kd 值最高。氟喹诺酮类、四环素类、大环内酯类和磺胺类抗生素的 Kd 值分别为 54600、7600、130 和 1.37L/kg。环境 pH 值、固体基质(沉积物/土壤/污泥)和离子强度等因素会影响 Kd;因此,同一化合物的文献中存在几个值。环境毒理化学 2021;40:3275-3298。 © 2021 SETAC。