Qingdao Solid Waste Pollution Control and Resource Engineering Research Center, School of Environment and Municipal Engineering, Qingdao University of Technology, Qingdao 266033, China; Jinan Environmental Research Academy, Jinan, Shandong 250100, China.
Jinan Environmental Research Academy, Jinan, Shandong 250100, China.
Sci Total Environ. 2021 Sep 20;788:147811. doi: 10.1016/j.scitotenv.2021.147811. Epub 2021 May 17.
Sewage treatment plants (STPs) and pharmaceutical manufactories (PMFs) are recognized as important reservoirs for aquatic pollution with antibiotics. Although the occurrence of multiple classes of antibiotics has been mostly reported for STPs and PMFs, knowledge on the effects of wastewater treatment processes on the removal of antibiotics is not well documented. In this study, wastewaters were collected from different treatment points of two STPs and two PMFs in eastern China. Thirty-seven antibiotics within the four classes of fluoroquinolones (FQs), macrolides (MACs), sulfonamides (SAs) and tetracyclines (TCs) were analyzed. Among the investigated antibiotics, 19-33 out of 37 target compounds were detected at least once in the STPs wastewaters ranging from low ng/L to approximately 12.7 μ/L. In the wastewater samples collected from PMFs, up to 34 antibiotics were present with detection frequencies up to 100%, showing generally higher concentrations (up to 19.0 μ/L) than those at the STPs. FQs and SAs were the dominant antibiotic families, which accounted for more than 90% of the total antibiotic concentration in the wastewaters. Moreover, the removal of antibiotics by anaerobic-anoxic-oxic (AO), membrane bioreactor (MBR) and conventional activated sludge (CAS) systems was evaluated. The MBR system exhibited the best performance, mainly due to the processes of biodegradation and sorption during biological treatments. Notably, several SAs (SMP, SMZ) and FQs (CIN, ENO) antibiotics were consistently detected at concentration levels of μ/L in the effluent samples. The culturable antibiotic-resistance tests and risk assessment indicated that the antibiotic-contaminated effluents would facilitate the development of resistant bacteria and pose high toxicity to non-target organisms in the aquatic environment. Overall, the findings suggested an urgent need for improving the wastewater treatment technologies for simultaneous removal of different classes of antibiotics.
污水处理厂(STP)和制药厂(PMF)被认为是水体中抗生素污染的重要储存库。尽管 STP 和 PMF 中已大多报道了多种抗生素的存在,但关于废水处理过程对抗生素去除的影响的知识尚未得到很好的记录。在本研究中,从中国东部的两个 STP 和两个 PMF 的不同处理点收集了废水。分析了四类抗生素(氟喹诺酮类(FQs)、大环内酯类(MACs)、磺胺类(SAs)和四环素类(TCs)中的 37 种抗生素。在所研究的抗生素中,至少有 19-33 种目标化合物在 STP 废水中被检测到,浓度范围从低 ng/L 到约 12.7 μ/L。在从 PMF 收集的废水样品中,多达 34 种抗生素存在,检测频率高达 100%,浓度通常高于 STP(高达 19.0 μ/L)。FQs 和 SAs 是主要的抗生素家族,占废水中总抗生素浓度的 90%以上。此外,还评估了厌氧-缺氧-好氧(AO)、膜生物反应器(MBR)和传统活性污泥(CAS)系统对抗生素的去除效果。MBR 系统表现出最好的性能,这主要是由于生物处理过程中的生物降解和吸附作用。值得注意的是,几种磺胺类(SMP、SMZ)和氟喹诺酮类(CIN、ENO)抗生素在出水样品中以 μ/L 级的浓度持续被检测到。可培养抗生素抗性测试和风险评估表明,受抗生素污染的废水会促进抗性细菌的发展,并对水生环境中的非目标生物产生高毒性。总体而言,研究结果表明迫切需要改进废水处理技术,以同时去除不同类别的抗生素。