Ortega Eduardo, Boothroyd Chris, de Jonge Niels
INM-Leibniz Institute for New Materials, Saarbrücken 66123, Germany.
Facility for Analysis Characterisation Testing and Simulation and School of Materials Science and Engineering, Nanyang Technological University, 639798 Singapore.
Ultramicroscopy. 2021 Nov;230:113383. doi: 10.1016/j.ultramic.2021.113383. Epub 2021 Aug 18.
The effect of chromatic aberration (CC) on the spatial resolution in transmission electron microscopy (TEM) was studied in thick specimens in which the sample becomes the limiting factor in the resolution. The sample influences the energy spread of the electron beam, allows only a limited electron dose, and modulates electron scattering events. The experimental set-up consisted of a thin silicon nitride membrane and a silicon wedge containing gold nanoparticles. The resolution was measured as a function of electron dose and sample thickness for different sample configurations and for different microscopy modalities including regular TEM, energy filtered TEM (EFTEM) and CC-corrected TEM. Comparison with an analytical model aided the understanding of the experimental data applied over varied conditions. The general trend for all microscopy modalities was a transition from a noise-limited resolution at low electron dose to a CC-limited resolution at high-dose in the absence of beam blurring. EFTEM required an accurate energy slit offset and an optimal energy spread to energy-slit width ratio to surpass regular TEM. The key advantage of CC correction appeared to be the best possible resolution for larger sample thickness at low electron dose outperforming EFTEM by about fifty percent. Several hypothetical sample configurations relevant to liquid phase electron microscopy were evaluated as well to demonstrate the capabilities of the analytical model and to determine the most optimal microscopy modality for this type of experiment. The analytical model included an automated optimization of the EFTEM settings and may aid in optimizing the sample-limited resolution for experimental analysis and planning.
在厚样品中研究了色差(CC)对透射电子显微镜(TEM)空间分辨率的影响,在这类厚样品中,样品成为分辨率的限制因素。样品会影响电子束的能量展宽,只允许有限的电子剂量,并调节电子散射事件。实验装置由一个薄氮化硅膜和一个含有金纳米颗粒的硅楔组成。针对不同的样品配置以及包括常规TEM、能量过滤TEM(EFTEM)和CC校正TEM在内的不同显微镜模式,测量了分辨率与电子剂量和样品厚度的函数关系。与分析模型进行比较有助于理解在不同条件下应用的实验数据。在不存在束模糊的情况下,所有显微镜模式的总体趋势是从低电子剂量下的噪声限制分辨率转变为高剂量下的CC限制分辨率。EFTEM需要精确的能量狭缝偏移和最佳的能量展宽与能量狭缝宽度比才能超越常规TEM。CC校正的关键优势似乎是在低电子剂量下对于较大样品厚度能实现最佳分辨率,比EFTEM高出约50%。还评估了几种与液相电子显微镜相关的假设样品配置,以展示分析模型的能力,并确定此类实验的最佳显微镜模式。该分析模型包括对EFTEM设置的自动优化,可能有助于优化用于实验分析和规划的样品限制分辨率。