An LC Wireless Passive Pressure Sensor Based on Single-Crystal MgO MEMS Processing Technique for High Temperature Applications.

An LC wireless passive pressure sensor based on a single-crystalline magnesium oxide (MgO) MEMS processing technique is proposed and experimentally demonstrated for applications in environmental conditions of 900 °C. Compared to other high-temperature resistant materials, MgO was selected as the sensor substrate material for the first time in the field of wireless passive sensing because of its ultra-high melting point (2800 °C) and excellent mechanical properties at elevated temperatures. The sensor mainly consists of inductance coils and an embedded sealed cavity. The cavity length decreases with the applied pressure, leading to a monotonic variation in the resonant frequency of the sensor, which can be retrieved wirelessly via a readout antenna. The capacitor cavity was fabricated using a MgO MEMS technique. This MEMS processing technique, including the wet chemical etching and direct bonding process, can improve the operating temperature of the sensor. The experimental results indicate that the proposed sensor can stably operate at an ambient environment of 22-900 °C and 0-700 kPa, and the pressure sensitivity of this sensor at room temperature is 14.52 kHz/kPa. In addition, the sensor with a simple fabrication process shows high potential for practical engineering applications in harsh environments.