IEEE Trans Biomed Circuits Syst. 2021 Dec;15(6):1140-1148. doi: 10.1109/TBCAS.2021.3128418. Epub 2022 Feb 17.
This paper presents a 288-pixel retinal prosthesis (RP) chip implemented in a 0.18 μm CMOS process. The proposed light-to-stimulus duration converter (LSDC) and biphasic stimulator generate a wide range of retinal stimuli proportional to the incident light intensity at a low supply voltage of 1V. The implemented chip shows 25.5 dB dynamic stimulation range and the state-of-the art low power consumption of 4.49 nW/pixel. Ex-vivo experiments were performed with a mouse retina and patch-clamp recording. The electrical artifact recorded by the patch electrode demonstrates that the proposed chip can generate electrical stimuli that have different pulse durations depending on the light intensity. Correspondingly, the spike counts in a retinal ganglion cell (RGC) were successfully modulated by the brightness of the light stimuli.
本文提出了一种 288 像素的视网膜假体 (RP) 芯片,该芯片采用 0.18 μm CMOS 工艺实现。所提出的光刺激持续时间转换器 (LSDC) 和双相刺激器在 1V 的低电源电压下,可生成与入射光强度成比例的宽范围视网膜刺激,且具有低功耗的特点。该实现的芯片显示出 25.5 dB 的动态刺激范围,以及 4.49 nW/像素的最新低功耗水平。通过对老鼠视网膜进行离体实验和膜片钳记录,实验证明,该芯片可以产生不同脉冲持续时间的电刺激,具体取决于光强度。相应地,通过光刺激的亮度可以成功调节视网膜神经节细胞 (RGC) 的尖峰计数。