Fatimah Is, Purwiandono Gani, Citradewi Putwi Widya, Sagadevan Suresh, Oh Won-Chun, Doong Ruey-An
Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Islam Indonesia, Kampus Terpadu UII, Jl. Kaliurang Km 14, Sleman, Yogyakarta 55584, Indonesia.
Nanotechnology & Catalysis Research Centre, University of Malaya, Kuala Lumpur 50603, Malaysia.
Nanomaterials (Basel). 2021 Dec 17;11(12):3427. doi: 10.3390/nano11123427.
In this work, photoactive nanocomposites of ZnO/SiO porous heterostructures (PCHs) were prepared from montmorillonite clay. The effects of preparation methods and Zn content on the physicochemical features and photocatalytic properties were investigated. Briefly, a comparison of the use of hydrothermal and microwave-assisted methods was done. The Zn content was varied between 5 and 15 wt% and the characteristics of the nanomaterials were also examined. The physical and chemical properties of the materials were characterized using X-ray diffraction, diffuse-reflectance UV-Vis, X-ray photoelectron spectroscopy, and gas sorption analyses. The morphology of the synthesized materials was characterized through scanning electron microscopy and transmission electron microscopy. The photocatalytic performance of the prepared materials was quantified through the photocatalytic degradation of methyl violet (MV) under irradiation with UV and visible light. It was found that PCHs exhibit greatly improved physicochemical characteristics as photocatalysts, resulting in boosting photocatalytic activity for the degradation of MV. It was found that varied synthesis methods and Zn content strongly affected the specific surface area, pore distribution, and band gap energy of PCHs. In addition, the band gap energy was found to govern the photoactivity. Additionally, the surface parameters of the PCHs were found to contribute to the degradation mechanism. It was found that the prepared PCHs demonstrated excellent photocatalytic activity and reusability, as seen in the high degradation efficiency attained at high concentrations. No significant changes in activity were seen until five cycles of photodegradation were done.
在这项工作中,由蒙脱石粘土制备了ZnO/SiO多孔异质结构(PCHs)的光活性纳米复合材料。研究了制备方法和锌含量对其物理化学特性及光催化性能的影响。简要地说,对水热法和微波辅助法的使用进行了比较。锌含量在5 wt%至15 wt%之间变化,同时也考察了纳米材料的特性。使用X射线衍射、漫反射紫外可见光谱、X射线光电子能谱和气体吸附分析对材料的物理和化学性质进行了表征。通过扫描电子显微镜和透射电子显微镜对合成材料的形态进行了表征。通过在紫外光和可见光照射下对甲基紫(MV)的光催化降解来量化所制备材料的光催化性能。发现PCHs作为光催化剂表现出大大改善的物理化学特性,从而提高了对MV降解的光催化活性。发现不同的合成方法和锌含量强烈影响PCHs的比表面积、孔分布和带隙能量。此外,发现带隙能量决定光活性。另外,发现PCHs的表面参数有助于降解机理。发现所制备的PCHs表现出优异的光催化活性和可重复使用性,如在高浓度下达到的高降解效率所示。在进行五个光降解循环之前,活性没有明显变化。