Dagamseh Ahmad, Qananwah Qasem, Al Quran Hiam, Shaker Ibrahim Khalid
Department of Electronics Engineering, Hijjawi Faculty for Engineering Technology, Yarmouk University, P.O. Box 21163, Irbid, Jordan.
Department of Biomedical Systems and informatics Engineering, Hijjawi Faculty for Engineering Technology, Yarmouk University, P.O. Box 21163, Irbid, Jordan.
Biomed Opt Express. 2021 Nov 19;12(12):7732-7751. doi: 10.1364/BOE.444535. eCollection 2021 Dec 1.
Blood pressure (BP) responds instantly to the body's conditions, such as movements, diseases or infections, and sudden excitation. Therefore, BP monitoring is a standard clinical measurement and is considered one of the fundamental health signs that assist in predicting and diagnosing several cardiovascular diseases. The traditional BP techniques (i.e. the cuff-based methods) only provide intermittent measurements over a certain period. Additionally, they cause turbulence in the blood flow, impeding the continuous BP monitoring, especially in emergency cases. In this study, an instrumentation system is designed to estimate BP noninvasively by measuring the PPG signal utilizing the optical technique. The photoplethysmogram (PPG) signals were measured and processed for ≈ 450 cases with different clinical conditions and irrespective of their health condition. A total of 13 features of the PPG signal were used to estimate the systolic and diastolic blood pressure (SBP and DBP), utilizing several machine learning techniques. The experimental results showed that the designed system is able to effectively describe the complex-embedded relationship between the features of the PPG signal and BP (SBP and DBP) with high accuracy. The mean absolute error (MAE) ± standard deviation (SD) was 4.82 ± 3.49 mmHg for the SBP and 1.37 ± 1.65 mmHg for the DBP, with a mean error (ME) of ≈ 0 mmHg. The estimation results are consistent with the Association for the American National Standards of the Association for the Advancement of Medical Instrumentation (AAMI) and achieved Grade A in the British Hypertension Society (BHS) standards for the DBP and Grade B for the SBP. Such a study effectively contributes to the scientific efforts targeting the promotion of the practical application for providing a portable-noninvasive instrumentation system for BP monitoring purposes. Once the BP is determined with sufficient accuracy, it can be utilized further in the early prediction and classification of various arrhythmias such as hypertension, tachycardia, bradycardia, and atrial fibrillation (as the early detection can be a critical issue).
血压(BP)会对身体状况立即做出反应,如运动、疾病或感染以及突然的兴奋状态。因此,血压监测是一项标准的临床测量方法,被视为有助于预测和诊断多种心血管疾病的基本健康指标之一。传统的血压测量技术(即基于袖带的方法)仅在特定时间段内提供间歇性测量。此外,它们会导致血流紊乱,妨碍连续的血压监测,尤其是在紧急情况下。在本研究中,设计了一种仪器系统,通过利用光学技术测量光电容积脉搏波(PPG)信号来无创估计血压。针对约450例不同临床状况且不论其健康状况的病例,测量并处理了光电容积脉搏波(PPG)信号。利用多种机器学习技术,共使用了PPG信号的13个特征来估计收缩压和舒张压(SBP和DBP)。实验结果表明,所设计的系统能够以高精度有效地描述PPG信号特征与血压(SBP和DBP)之间复杂的内在关系。收缩压的平均绝对误差(MAE)±标准差(SD)为4.82±3.49 mmHg,舒张压为1.37±1.65 mmHg,平均误差(ME)约为0 mmHg。估计结果与美国医疗器械促进协会(AAMI)的美国国家标准协会一致,在英国高血压协会(BHS)标准中,舒张压达到A级,收缩压达到B级。这样的研究有效地推动了旨在推广用于血压监测目的的便携式无创仪器系统实际应用的科学努力。一旦血压能够以足够的精度确定,它可进一步用于各种心律失常(如高血压、心动过速、心动过缓和心房颤动)的早期预测和分类(因为早期检测可能是一个关键问题)。