Zhang J, Yan R S, Yang Z C, Shi X, Li X, Mao T C, Zhang Y M
Department of Plastic and Cosmetic Surgery, the Second Affiliated Hospital of Army Medical University (the Third Military Medical University), Chongqing 400037, China.
Zhonghua Shao Shang Yu Chuang Mian Xiu Fu Za Zhi. 2022 Feb 20;38(2):137-146. doi: 10.3760/cma.j.cn501120-20211130-00400.
To isolate and purify a bacteriophage against methicillin-resistant (MRSA), and to analyze its genomic information and biological characteristics. The experimental research methods were adopted. MRSA (hereinafter referred to as host bacteria) solution was collected from the wound of a 63-year-old female patient with the median sternum incision infection admitted to the Second Affiliated Hospital of Army Medical University (the Third Military Medical University). The bacteriophage, named bacteriophage SAP23 was isolated and purified from the sewage of the Hospital by sewage co-culture method and double-layer agar plate method, and the plaque morphology was observed. The morphology of bacteriophage SAP23 was observed by transmission electron microscope after phosphotungstic acid negative staining. The whole genome of bacteriophage SAP23 was sequenced with NovaSeq PE15 platform after its DNA was prepared by sodium dodecyl sulfonate/protease cleavage scheme, and genomic analysis including sequence assembly, annotation, and phylogenetic tree were completed. The bacteriophage SAP23 solution was co-incubated with the host bacterial solution for 4 h at the multiplicity of infection (MOI) of 10.000 0, 1.000 0, 0.100 0, 0.010 0, 0.001 0, and 0.000 1, respectively, and then the bacteriophage titer was measured by the drip plate method to select the optimal MOI, with here and the following sample numbers of 3. The bacteriophage SAP23 solution was co-incubated with the host bacterial solution at the optimal MOI for 5, 10, and 15 min, respectively, and the bacteriophage titer was measured by the same method as mentioned above to select the optimal adsorption time. After the bacteriophage SAP23 solution was co-incubated with the host bacterial solution at the optimal MOI for the optimal adsorption time, the bacteriophage titers were measured by the same method as mentioned above at 0 (immediately), 5, 10, 15, 20, 30, 40, 50, 60, 80, 100, and 120 min after culture, respectively, and a one-step growth curve was drawn. The bacteriophage SAP23 solution was incubated at 4, 37, 50, 60, 70, and 80 ℃ and pH 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12 for 1 h, respectively, to determine its stability. A total of 41 MRSA strains stored in the Department of Microbiology of Army Medical University (the Third Military Medical University) were used to determine the host spectrum of bacteriophage SAP23. The bacteriophage SAP23 could form a transparent plaque on the host bacteria double-layer agar plate. The bacteriophage SAP23 has a polyhedral head with (88±4) nm in diameter and a tail with (279±21) nm in length and (22.6±2.6) nm in width. The bacteriophage SAP23 has a linear, double-stranded DNA with a full length of 151 618 bp and 11 681 bp long terminal repeats sequence in the sequence ends. There were 220 open reading frames predicted and the bacteriophage could encode 4 transfer RNAs, while no resistance genes or virulence factors were found. The annotation function of bacteriophage SAP23 genes could be divided into 5 groups. The GenBank accession number was MZ427930. According to the genomic collinearity analysis, there were 5 local collinear blocks in the whole genome between the bacteriophage SAP23 and the chosen 6 bacteriophages, while within or outside the local collinear region, there were still some differences. The bacteriophage SAP23 belonged to the family, subfamily, and genus. The optimal MOI of bacteriophage SAP23 was 0.010 0, and the optimal adsorption time was 10 min. The bacteriophage SAP23 had a latent period of 20 min, and a growth phase of 80 min. The bacteriophage SAP23 was able to remain stable at the temperature between 4 and 37 ℃ and at the pH values between 4 and 9. The bacteriophage SAP23 could lyse 3 of the 41 tested MRSA strains. The bacteriophage SAP23 is a member of the family, subfamily, and genus. The bacteriophage SAP23 has a good tolerance for temperature and acid-base and a short latent period, and can lyse MRSA effectively. The bacteriophage SAP23 is a new type of potent narrow-spectrum bacteriophage without virulence factors and resistance genes.
分离纯化一株抗耐甲氧西林金黄色葡萄球菌(MRSA)的噬菌体,并分析其基因组信息和生物学特性。采用实验研究方法。从陆军军医大学第二附属医院(第三军医大学)收治的1例63岁女性正中胸骨切口感染患者的伤口处采集MRSA(以下简称宿主菌)溶液。通过污水共培养法和双层琼脂平板法从医院污水中分离纯化出噬菌体,命名为噬菌体SAP23,并观察噬菌斑形态。经磷钨酸负染后,用透射电子显微镜观察噬菌体SAP23的形态。采用十二烷基磺酸钠/蛋白酶裂解方案制备噬菌体SAP23的DNA后,利用NovaSeq PE15平台对其全基因组进行测序,并完成序列组装、注释及系统发育树构建等基因组分析。将噬菌体SAP23溶液分别与宿主菌溶液在感染复数(MOI)为10.000 0、1.000 0、0.100 0、0.010 0、0.001 0和0.000 1的条件下共孵育4 h,然后采用点滴平板法测定噬菌体效价以选择最佳MOI,此处及以下样本数均为3。将噬菌体SAP23溶液与宿主菌溶液在最佳MOI下分别共孵育5、10和15 min,采用上述相同方法测定噬菌体效价以选择最佳吸附时间。噬菌体SAP23溶液与宿主菌溶液在最佳MOI及最佳吸附时间共孵育后,分别在培养后0(立即)、5、10、15、20、30、40、50、60、80、100和120 min采用上述相同方法测定噬菌体效价,并绘制一步生长曲线。将噬菌体SAP23溶液分别在4、37、50、60、70和80℃以及pH 2、3、4、5、6、7、8、9、10、11和12条件下孵育1 h,以测定其稳定性。采用陆军军医大学(第三军医大学)微生物学教研室保存的41株MRSA菌株测定噬菌体SAP23的宿主谱。噬菌体SAP23在宿主菌双层琼脂平板上可形成透明噬菌斑。噬菌体SAP23头部呈多面体,直径为(88±4)nm,尾部长度为(279±21)nm,宽度为(22.6±2.6)nm。噬菌体SAP23具有线性双链DNA,全长151 618 bp,序列两端有11 681 bp的长末端重复序列。预测有220个开放阅读框,该噬菌体可编码4个转运RNA,未发现耐药基因或毒力因子。噬菌体SAP23基因的注释功能可分为5组。GenBank登录号为MZ427930。根据基因组共线性分析,噬菌体SAP23与所选6种噬菌体的全基因组中有5个局部共线性区域,但在局部共线性区域内外仍存在一些差异。噬菌体SAP23属于 科、 亚科和 属。噬菌体SAP23的最佳MOI为0.010 0,最佳吸附时间为10 min。噬菌体SAP23的潜伏期为20 min,生长阶段为80 min。噬菌体SAP23在4至37℃以及pH值为4至9时能够保持稳定。噬菌体SAP23可裂解41株受试MRSA菌株中的3株。噬菌体SAP23是 科、 亚科和 属的成员。噬菌体SAP23对温度和酸碱具有良好耐受性,潜伏期短,能有效裂解MRSA。噬菌体SAP23是一种新型强效窄谱噬菌体,无毒力因子和耐药基因。