Jovanović Zoran, Gauquelin Nicolas, Koster Gertjan, Rubio-Zuazo Juan, Ghosez Philippe, Verbeeck Johan, Suvorov Danilo, Spreitzer Matjaž
Advanced Materials Department, Jožef Stefan Institute Jamova 39 1000 Ljubljana Slovenia
Laboratory of Physics, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, University of Belgrade Belgrade Serbia
RSC Adv. 2020 Aug 24;10(52):31261-31270. doi: 10.1039/d0ra06548j. eCollection 2020 Aug 21.
Epitaxial integration of transition-metal oxides with silicon brings a variety of functional properties to the well-established platform of electronic components. In this process, deoxidation and passivation of the silicon surface are one of the most important steps, which in our study were controlled by an ultra-thin layer of SrO and monitored by using transmission electron microscopy (TEM), electron energy-loss spectroscopy (EELS), synchrotron X-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED) methods. Results revealed that an insufficient amount of SrO leads to uneven deoxidation of the silicon surface formation of pits and islands, whereas the composition of the as-formed heterostructure gradually changes from strontium silicide at the interface with silicon, to strontium silicate and SrO in the topmost layer. Epitaxial ordering of SrO, occurring simultaneously with silicon deoxidation, was observed. RHEED analysis has identified that SrO is epitaxially aligned with the (001) Si substrate both with SrO (001) and SrO (111) out-of-plane directions. This observation was discussed from the point of view of SrO desorption, SrO-induced deoxidation of the Si (001) surface and other interfacial reactions as well as structural ordering of deposited SrO. Results of the study present an important milestone in understanding subsequent epitaxial integration of functional oxides with silicon using SrO.
过渡金属氧化物与硅的外延集成给成熟的电子元件平台带来了多种功能特性。在这个过程中,硅表面的脱氧和钝化是最重要的步骤之一,在我们的研究中,这一步骤由一层超薄的SrO控制,并通过透射电子显微镜(TEM)、电子能量损失谱(EELS)、同步加速器X射线衍射(XRD)和反射高能电子衍射(RHEED)方法进行监测。结果表明,SrO用量不足会导致硅表面脱氧不均匀,形成坑和岛,而形成的异质结构的组成从与硅界面处的硅化锶逐渐变化到最顶层的硅酸锶和SrO。观察到SrO的外延有序化与硅脱氧同时发生。RHEED分析表明,SrO与(001)Si衬底在外延上对齐,其SrO(001)和SrO(111)面外方向均如此。从SrO解吸、SrO诱导的Si(001)表面脱氧和其他界面反应以及沉积SrO的结构有序化的角度讨论了这一观察结果。该研究结果是理解后续使用SrO将功能氧化物与硅进行外延集成的一个重要里程碑。