Analytical X-ray Physics, Technical University of Berlin, Hardenbergstr. 36, 10623 Berlin, Germany.
Fachbereich Physik, Universitö at Hamburg and Center for Free-Electron Laser Science (CFEL), Luruper Chaussee 149, 22761 Hamburg, Germany.
Int J Mol Sci. 2022 Apr 23;23(9):4673. doi: 10.3390/ijms23094673.
Trace elements, functionalized nanoparticles and labeled entities can be localized with sub-mm spatial resolution by X-ray fluorescence imaging (XFI). Here, small animals are raster scanned with a pencil-like synchrotron beam of high energy and low divergence and the X-ray fluorescence is recorded with an energy-dispersive detector. The ability to first perform coarse scans to identify regions of interest, followed by a close-up with a sub-mm X-ray beam is desirable, because overall measurement time and X-ray dose absorbed by the (biological) specimen can thus be minimized. However, the size of X-ray beams at synchrotron beamlines is usually strongly dependent on the actual beamline setup and can only be adapted within specific pre-defined limits. Especially, large synchrotron beams are non-trivial to generate. Here, we present the concept of graphite-based, convex reflection optics for the one-dimensional enlargement of a 1 mm wide synchrotron beam by a factor of 5 to 10 within a 1 m distance. Four different optics are tested and characterized and their reflection properties compared to ray tracing simulations. The general shape and size of the measured reflection profiles agree with expectations. Enhancements with respect to homogeneity and efficiency can be expected with improved optics manufacturing. A mouse phantom is used for a proof-of-principle XFI experiment demonstrating the applicability of coarse and fine scans with the suggested optics design.
微量元素、功能化纳米颗粒和标记实体可以通过 X 射线荧光成像 (XFI) 以亚毫米空间分辨率定位。在这里,高能低发散的铅笔状同步加速器束对小动物进行光栅扫描,并用能量色散探测器记录 X 射线荧光。首先进行粗略扫描以识别感兴趣的区域,然后用亚毫米 X 射线束进行特写的能力是可取的,因为可以最小化整体测量时间和(生物)样本吸收的 X 射线剂量。然而,同步加速器光束线上的 X 射线束的大小通常强烈依赖于实际的光束线设置,并且只能在特定的预定义限制内进行适应。特别是,大型同步加速器光束很难产生。在这里,我们提出了基于石墨的凸面反射光学的概念,用于在 1 米距离内将 1 毫米宽的同步加速器光束一维放大 5 到 10 倍。测试并表征了四种不同的光学元件,并将其反射特性与光线追踪模拟进行了比较。测量的反射轮廓的一般形状和尺寸与预期相符。通过改进光学制造,可以预期在均匀性和效率方面的增强。使用小鼠体模进行了原理验证 XFI 实验,证明了所建议的光学设计进行粗略和精细扫描的适用性。