Lintner F, Zweymüller K, Brand G
J Arthroplasty. 1986;1(3):183-95. doi: 10.1016/s0883-5403(86)80029-8.
Four cementless prosthetic hip implants of Ti-6Al-4V-alloy with and without longitudinal grooves and Al2O2 ceramic ball heads, with implant periods of 3, 4, 5, and 10 months, were sectioned and examined histologically in undecalcified thin ground sections. Especially on the medial and lateral sides of the prostheses, there was direct bone-to-metal contact without interposed connective tissue, spreading to the dorsal and ventral areas of the prosthesis shaft, which was considered osseointegration. This is based mainly on the technique of implantation with primary stability in the cortical bone by press-fit and on the bioinertness of the titanium alloy. Ungrooved prosthesis areas seem to favor bone growth at the shaft. The secondary bone ring, occurring on the dorsal and ventral areas of the prosthesis, with evidence of further bone remodeling with the passage of time, indicates that osseointegration is a dynamic process that continues to improve prosthetic stability.
四个未使用骨水泥的Ti-6Al-4V合金髋关节假体,分别有无纵向凹槽并搭配Al2O2陶瓷球头,植入期分别为3个月、4个月、5个月和10个月,将其切片并在未脱钙的薄磨片上进行组织学检查。特别是在假体的内侧和外侧,存在直接的骨与金属接触,中间没有结缔组织,这种接触扩展到假体柄的背侧和腹侧区域,这被认为是骨整合。这主要基于通过压配在皮质骨中实现初始稳定性的植入技术以及钛合金的生物惰性。无凹槽的假体区域似乎有利于假体柄处的骨生长。在假体的背侧和腹侧区域出现的继发性骨环,随着时间推移有进一步骨重塑的迹象,表明骨整合是一个动态过程,会持续提高假体稳定性。