Gerasimenko Alexander Yu, Morozova Elena A, Ryabkin Dmitry I, Fayzullin Alexey, Tarasenko Svetlana V, Molodykh Victoria V, Pyankov Evgeny S, Savelyev Mikhail S, Sorokina Elena A, Rogalsky Alexander Y, Shekhter Anatoly, Telyshev Dmitry V
Institute of Biomedical Systems, National Research University of Electronic Technology, Shokin Square 1, Zelenograd, 124498 Moscow, Russia.
Institute for Bionic Technologies and Engineering, I.M. Sechenov First Moscow State Medical University, Bolshaya Pirogovskaya Street 2-4, 119435 Moscow, Russia.
Bioengineering (Basel). 2022 May 29;9(6):238. doi: 10.3390/bioengineering9060238.
Laser soldering is a current biophotonic technique for the surgical recovery of the integrity of soft tissues. This technology involves the use of a device providing laser exposure to the cut edges of the wound with a solder applied. The proposed solder consisted of an aqueous dispersion of biopolymer albumin (25 wt.%), single-walled carbon nanotubes (0.1 wt.%) and exogenous indocyanine green chromophore (0.1 wt.%). Under laser exposure, the dispersion transforms into a nanocomposite due to the absorption of radiation and its conversion into heat. The nanocomposite is a frame structure of carbon nanotubes in a biopolymer matrix, which provides adhesion of the wound edges and the formation of a strong laser weld. A new laser device based on a diode laser (808 nm) has been developed to implement the method. The device has a temperature feedback system based on a bolometric infrared matrix sensor. The system determines the hottest area of the laser weld and adjusts the current supplied to the diode laser to maintain the preset laser heating temperature. The laser soldering technology made it possible to heal linear defects (cuts) in the skin of laboratory animals (rabbits) without the formation of a fibrotic scar compared to the control (suture material). The combined use of a biopolymer nanocomposite solder and a laser device made it possible to achieve a tensile strength of the laser welds of 4 ± 0.4 MPa. The results of the experiment demonstrated that the addition of single-walled carbon nanotubes to the solder composition leads to an increase in the ultimate tensile strength of the laser welds by 80%. The analysis of regenerative and morphological features in the early stages (1-3 days) after surgery revealed small wound gaps, a decrease in inflammation, the absence of microcirculatory disorders and an earlier epithelization of laser welds compared to the control. On the 10th day after the surgical operation, the laser weld was characterized by a thin cosmetic scar and a continuous epidermis covering the defect. An immunohistochemical analysis proved the absence of myofibroblasts in the area of the laser welds.
激光焊接是一种用于软组织完整性手术修复的生物光子技术。该技术涉及使用一种设备,在施加焊料的情况下,对伤口的切割边缘进行激光照射。所提出的焊料由生物聚合物白蛋白(25重量%)、单壁碳纳米管(0.1重量%)和外源性吲哚菁绿发色团(0.1重量%)的水分散体组成。在激光照射下,由于辐射吸收及其转化为热量,分散体转变为纳米复合材料。纳米复合材料是生物聚合物基质中碳纳米管的框架结构,它提供伤口边缘的粘附力并形成牢固的激光焊缝。已开发出一种基于二极管激光器(808纳米)的新型激光设备来实施该方法。该设备具有基于测辐射热红外矩阵传感器的温度反馈系统。该系统确定激光焊缝的最热区域,并调整供应给二极管激光器的电流,以维持预设的激光加热温度。与对照组(缝合材料)相比,激光焊接技术能够治愈实验动物(兔子)皮肤中的线性缺陷(切口),且不形成纤维化瘢痕。生物聚合物纳米复合焊料和激光设备的联合使用使得激光焊缝的拉伸强度达到4±0.4兆帕。实验结果表明,在焊料成分中添加单壁碳纳米管可使激光焊缝的极限拉伸强度提高80%。对手术后早期阶段(1 - 3天)的再生和形态特征分析表明,与对照组相比,激光焊缝的伤口间隙较小、炎症减轻、无微循环障碍且上皮化更早。在手术操作后的第10天,激光焊缝的特征是有一条薄的美容瘢痕和覆盖缺陷的连续表皮。免疫组织化学分析证明激光焊缝区域不存在肌成纤维细胞。