Hegaard Frederik Viktor, Klenow Martin Berg, Simonsen Adam Cohen
Department of Physics, Chemistry and Pharmacy (FKF), PhyLife - Physical LifeScience, University of Southern Denmark (SDU), Campusvej 55, 5230 Odense M, Denmark.
Langmuir. 2022 Aug 2;38(30):9247-9256. doi: 10.1021/acs.langmuir.2c01014. Epub 2022 Jul 18.
Lipid droplet biogenesis comprises the emergence of cytosolic lipid droplets with a typical diameter 0.1-5 μm via synthesis of fat in the endoplasmatic reticulum, the formation of membrane-embedded lenses, and the eventual budding of lenses into solution as droplets. Lipid droplets in cells are increasingly being viewed as highly dynamic organelles with multiple functions in cell physiology. However, the mechanism of droplet formation in cells remains poorly understood, partly because their formation involves the rapid transformation of transient lipid structures that are difficult to capture. Thus, the development of controlled experimental systems that model lipid biogenesis is highly relevant for an enhanced mechanistic understanding. Here we prepare and characterize triolein (TO) lenses in a multilamellar spin-coated phosphatidylcholine (POPC) film and determine the lens nucleation threshold to 0.25-0.5% TO. The TO lens shapes are characterized by atomic force microscopy (AFM) including their mean cap angle ⟨α⟩ = 27.3° and base radius ⟨⟩ = 152.7 nm. A cross-correlation analysis of corresponding AFM and fluorescence images confirms that TO is localized to lenses. Hydration of the lipid/lens film induces the gel to fluid membrane phase transition and makes the lenses more mobile. The budding of free droplets into solution from membrane lenses is detected by observing a change in motion from confined wiggling to ballistic motion of droplets in solution. The results confirm that droplet budding can occur spontaneously without being facilitated by proteins. The developed model system provides a controlled platform for testing mechanisms of lipid droplet biogenesis in vitro and addressing questions related to lens formation and droplet budding by quantitative image analysis.
脂滴生物合成包括通过在内质网中合成脂肪,形成直径通常为0.1 - 5μm的胞质脂滴,形成膜包埋的晶状体,以及最终晶状体以液滴形式芽生到溶液中。细胞中的脂滴越来越被视为在细胞生理学中具有多种功能的高度动态的细胞器。然而,细胞中脂滴形成的机制仍知之甚少,部分原因是其形成涉及难以捕获的瞬时脂质结构的快速转变。因此,开发模拟脂质生物合成的可控实验系统对于增强机制理解具有高度相关性。在这里,我们在多层旋涂磷脂酰胆碱(POPC)膜中制备并表征了三油酸甘油酯(TO)晶状体,并确定晶状体成核阈值为0.25 - 0.5% TO。通过原子力显微镜(AFM)对TO晶状体形状进行表征,包括其平均帽角⟨α⟩ = 27.3°和基部半径⟨⟩ = 152.7 nm。对相应的AFM和荧光图像进行互相关分析证实TO定位于晶状体。脂质/晶状体膜的水合作用诱导凝胶到流体膜相转变,并使晶状体更具流动性。通过观察溶液中液滴从受限摆动到弹道运动的运动变化,检测到游离液滴从膜晶状体芽生到溶液中。结果证实液滴芽生可以自发发生,无需蛋白质促进。所开发的模型系统为体外测试脂滴生物合成机制以及通过定量图像分析解决与晶状体形成和液滴芽生相关的问题提供了一个可控平台。