Kumar Udit, Fox Candace R, Feit Corbin, Kolanthai Elayaraja, Sheiber Jeremy, Fu Yifei, Singh Sushant, Banerjee Parag, Parks Griffith D, Seal Sudipta
Advanced Materials Processing and Analysis Center, Department of Materials Science and Engineering, University of Central Florida Engineering 1 Rm 207, 12800 Pegasus Dr Orlando FL 32816 USA
Department of Materials Science and Engineering, University of Central Florida Orlando FL 32816 USA.
RSC Adv. 2022 Jul 4;12(30):19327-19339. doi: 10.1039/d2ra02653h. eCollection 2022 Jun 29.
The COVID-19 pandemic has underscored the importance of research and development in maintaining public health. Facing unprecedented challenges, the scientific community developed antiviral drugs, virucides, and vaccines to combat the infection within the past two years. However, an ever-increasing list of highly infectious SARS-CoV-2 variants (gamma, delta, omicron, and now ba.2 stealth) has exacerbated the problem: again raising the issues of infection prevention strategies and the efficacy of personal protective equipment (PPE). Against this backdrop, we report an antimicrobial fabric for PPE applications. We have fabricated a nanofibrous silk-PEO material using electrospinning followed by zinc oxide thin film deposition by employing the atomic layer deposition technique. The composite fabric has shown 85% more antibacterial activity than the control fabric and was found to possess substantial superoxide dismutase-mimetic activity. The composite was further subjected to antiviral testing using two different respiratory tract viruses: coronavirus (OC43: enveloped) and rhinovirus (RV14: non-enveloped). We report a 95% reduction in infectious virus for both OC43 and RV14 from an initial load of ∼1 × 10 (sample size: 6 mm dia. disk), after 1 h of white light illumination. Furthermore, with 2 h of illumination, ∼99% reduction in viral infectivity was observed for RV14. High activity in a relatively small area of fabric (3.5 × 10 viral units per mm) makes this antiviral fabric ideal for application in masks/PPE, with an enhanced ability to prevent antimicrobial infection overall.
新冠疫情凸显了研发对于维护公众健康的重要性。面对前所未有的挑战,科学界在过去两年研发出了抗病毒药物、消毒剂和疫苗来对抗感染。然而,传染性不断增强的严重急性呼吸综合征冠状病毒2(SARS-CoV-2)变种(伽马、德尔塔、奥密克戎,以及现在的BA.2隐匿变种)名单日益增加,使问题更加严重:再次引发了感染预防策略和个人防护装备(PPE)功效的问题。在此背景下,我们报告了一种用于个人防护装备的抗菌织物。我们通过静电纺丝制备了一种纳米纤维丝-聚环氧乙烷材料,随后采用原子层沉积技术沉积氧化锌薄膜。这种复合织物的抗菌活性比对照织物高85%,并被发现具有大量超氧化物歧化酶模拟活性。该复合材料进一步使用两种不同的呼吸道病毒进行抗病毒测试:冠状病毒(OC43:有包膜)和鼻病毒(RV14:无包膜)。我们报告,在白光照射1小时后,对于初始病毒载量约为1×10(样本尺寸:直径6毫米圆盘)的OC43和RV14,传染性病毒均减少了95%。此外,在照射2小时后,观察到RV14的病毒感染性降低了约99%。在相对较小的织物面积(每平方毫米3.5×10个病毒单位)内具有高活性,使得这种抗病毒织物非常适合用于口罩/个人防护装备,总体上增强了预防抗菌感染的能力。