Kondaveeti Sanath, Bisht Aarti, Pagolu Raviteja, Lai Chunfen, Lestari Rowina, Kumar Anurag, Das Devashish, Kalia Vipin C, Lee Jung-Kul
Department of Chemical Engineering, Konkuk University, 1 Hwayang-Dong, Gwangjin-Gu, Seoul, 05029 South Korea.
Indian J Microbiol. 2022 Sep;62(3):447-455. doi: 10.1007/s12088-022-01022-z. Epub 2022 Apr 25.
The dependency on non-renewable fossil fuels as an energy source has drastically increased global temperatures. Their continuous use poses a great threat to the existing energy reserves. Therefore, the energy sector has taken a turn toward developing eco-friendly, sustainable energy generation by using sustainable lignocellulosic wastes, such as rice straw (RS). For lignocellulosic waste to be utilized as an efficient energy source, it needs to be broken down into less complex forms by pretreatment processes, such as alkaline pretreatment using NaOH. Varied NaOH concentrations (0.5%,1.0%,1.5%,2%) for alkaline pretreatment of RS were used for the holocellulose generation. Amongst the four NaOH concentrations tested, RS-1.5% exhibited higher holocellulose generation of 80.1%, whereas 0.5%, 1 5 and 2% pointed 71.9%, 73.8%, and 78.5% holocellulose generation, respectively. Further, microbial fuel cells (MFCs) were tested for voltage generation by utilizing holocellulose generated from untreated (RS-0%) and mildly alkaline pretreated RS (RS-1.5%) as a feedstock. The MFC voltage and maximum power generation using RS-0% were 194 mV and 167 mW/m, respectively. With RS-1.5%, the voltage and maximum power generation were 556 mV and 583 mW/m, respectively. The power density of RS-1.5% was three-fold higher than that of RS-0%. The increase in MFC power generation suggests that alkaline pretreatment plays a crucial role in enhancing the overall performance.
对不可再生化石燃料作为能源的依赖已大幅提高了全球气温。其持续使用对现有能源储备构成了巨大威胁。因此,能源部门已转向通过使用可持续的木质纤维素废料(如稻草(RS))来开发环保、可持续的能源生产。为了将木质纤维素废料用作高效能源,需要通过预处理工艺(如使用NaOH进行碱性预处理)将其分解为不太复杂的形式。使用不同的NaOH浓度(0.5%、1.0%、1.5%、2%)对RS进行碱性预处理以生成全纤维素。在所测试的四种NaOH浓度中,RS-1.5%表现出更高的全纤维素生成率,为80.1%,而0.5%、1.0%和2%的全纤维素生成率分别为71.9%、73.8%和78.5%。此外,测试了微生物燃料电池(MFCs)利用未经处理的(RS-0%)和轻度碱性预处理的RS(RS-1.5%)生成的全纤维素作为原料来产生电压。使用RS-0%时,MFC的电压和最大功率生成分别为194 mV和167 mW/m。使用RS-1.5%时,电压和最大功率生成分别为556 mV和583 mW/m。RS-1.5%的功率密度比RS-0%高三倍。MFC发电的增加表明碱性预处理在提高整体性能方面起着关键作用。