Haq Wadood, Basavaraju Sunetra, Speck Achim, Zrenner Eberhart
Neuroretinal Electrophysiology and Imaging, Centre for Ophthalmology, Institute for Ophthalmic Research, University of Tübingen, Elfriede-Aulhorn-Str. 5-7, D-72076 Tübingen, Germany.
J Neural Eng. 2022 Sep 6;19(5). doi: 10.1088/1741-2552/ac8ad0.
. Retinal electrical stimulation using multi-electrode arrays (MEAs) aims to restore visual object perception in blind patients. However, the rate and duration of the artificial visual sensations are limited due to the rapid response decay of the stimulated neurons. Hence, we investigated a novel nature-inspired saccadic-like stimulation paradigm (biomimetic) to evoke sustained retinal responses. For implementation, the macroelectrode was replaced by several contiguous microelectrodes and activated non-simultaneously but alternating topologically.MEAs with hexagonally arranged electrodes were utilized to simulate and record mouse retinal ganglion cells (RGCs). Two shapes were presented electrically using MEAs: a 6e-hexagon (six hexagonally arranged 10m electrodes; 6e-hexagon diameter: 80m) and a double-bar (180m spaced, 320m in length). Electrodes of each shape were activated in three different modes (simultaneous, circular, and biomimetic ('zig-zag')), stimulating at different frequencies (1-20 Hz).The biomimetic stimulation generated enhanced RGC responses increasing the activity rate by 87.78%. In the spatiotemporal context, the electrical representation of the 6e-hexagon produced sustained and local RGC responses (∼130m corresponding to ∼2.5° of the human visual angle) for up to 90 s at 10 Hz stimulation and resolved the electrically presented double-bar. In contrast, during conventional simultaneous stimulation, the responses were poor and declined within seconds. Similarly, the applicability of the biomimetic mode for retinal implants (7 × 8 pixels) was successfully demonstrated. An object shape impersonating a smile was presented electrically, and the recorded data were used to emulate the implant's performance. The spatiotemporal pixel mapping of the activity produced a complete retinal image of the smile.The application of electrical stimulation in the biomimetic mode produced locally enhanced RGC responses with significantly reduced fading effects and yielded advanced spatiotemporal performance reflecting the presented electrode shapes in the mapped activity imprint. Therefore, it is likely that the RGC responses persist long enough to evoke visual perception and generate a seamless image, taking advantage of the flicker fusion. Hence, replacing the implant's macroelectrodes with microelectrodes and their activation in a topologically alternating biomimetic fashion may overcome the patient's perceptual image fading, thereby enhancing the spatiotemporal characteristics of artificial vision.
使用多电极阵列(MEA)进行视网膜电刺激旨在恢复盲人患者的视觉物体感知。然而,由于受刺激神经元的快速反应衰减,人工视觉感觉的速率和持续时间受到限制。因此,我们研究了一种新型的受自然启发的类似扫视的刺激范式(仿生),以诱发持续的视网膜反应。为了实现这一目标,将宏观电极替换为几个相邻的微电极,并以拓扑交替的方式而非同时激活。利用具有六边形排列电极的MEA来模拟和记录小鼠视网膜神经节细胞(RGC)。使用MEA以电方式呈现两种形状:一个6e-六边形(六个六边形排列的10m电极;6e-六边形直径:80m)和一个双条(间隔180m,长度320m)。每种形状的电极以三种不同模式(同时、圆形和仿生(“之字形”))激活,以不同频率(1-20Hz)进行刺激。仿生刺激产生增强的RGC反应,使活动速率提高了87.78%。在时空背景下,6e-六边形的电表示在10Hz刺激下产生持续的局部RGC反应(约130m对应于人类视角的约2.5°),持续长达90秒,并分辨出电呈现的双条。相比之下,在传统的同时刺激期间,反应较差且在数秒内下降。同样,成功证明了仿生模式对视网膜植入物(7×8像素)的适用性。以电方式呈现一个模仿微笑的物体形状,并使用记录的数据来模拟植入物的性能。活动的时空像素映射产生了微笑的完整视网膜图像。以仿生模式应用电刺激产生局部增强的RGC反应,显著减少了消退效应,并产生了先进的时空性能,在映射活动印记中反映了所呈现的电极形状。因此,利用闪烁融合,RGC反应可能持续足够长的时间以唤起视觉感知并生成无缝图像。因此,用微电极替换植入物的宏观电极并以拓扑交替的仿生方式激活它们可能克服患者的感知图像消退,从而增强人工视觉的时空特性。