Department of Physical Chemistry, Faculty of Chemical Technology, University of Pardubice, Studentská 573, 532 10 Pardubice, Czech Republic.
Center of Materials and Nanotechnologies (CEMNAT), Faculty of Chemical Technology, University of Pardubice, nam. Cs legii 565, 530 02 Pardubice, Czech Republic.
Molecules. 2022 Sep 2;27(17):5668. doi: 10.3390/molecules27175668.
Non-isothermal differential scanning calorimetry (DSC) was used to study the influences of particle size (d) and heating rate (q) on the structural relaxation, crystal growth and decomposition kinetics of amorphous indomethacin. The structural relaxation and decomposition processes exhibited d-independent kinetics, with the q dependences based on the apparent activation energies of 342 and 106 kJ·mol, respectively. The DSC-measured crystal growth kinetics played a dominant role in the nucleation throughout the total macroscopic amorphous-to-crystalline transformation: the change from the zero-order to the autocatalytic mechanism with increasing q, the significant alteration of kinetics, with the storage below the glass transition temperature, and the accelerated crystallization due to mechanically induced defects. Whereas slow q led to the formation of the thermodynamically stable γ polymorph, fast q produced a significant amount of the metastable α polymorph. Mutual correlations between the macroscopic and microscopic crystal growth processes, and between the viscous flow and structural relaxation motions, were discussed based on the values of the corresponding activation energies. Notably, this approach helped us to distinguish between particular crystal growth modes in the case of the powdered indomethacin materials. Ediger's decoupling parameter was used to quantify the relationship between the viscosity and crystal growth. The link between the cooperativity of structural domains, parameters of the Tool-Narayanaswamy-Moynihan relaxation model and microscopic crystal growth was proposed.
采用非等温热差扫描量热法(DSC)研究了粒径(d)和升温速率(q)对无定形吲哚美辛结构弛豫、晶体生长和分解动力学的影响。结构弛豫和分解过程表现出与粒径无关的动力学行为,升温速率的依赖性分别基于表观活化能为 342 和 106 kJ·mol。DSC 测量的晶体生长动力学在整个无定形到结晶的宏观转变过程中起主导作用:随着 q 的增加,从零级到自催化机制的转变,动力学的显著变化,低于玻璃化转变温度下的储存,以及由于机械诱导缺陷而加速结晶。虽然缓慢的 q 导致热力学稳定的 γ 多晶型体的形成,但快速的 q 产生了大量的亚稳定的 α 多晶型体。基于相应活化能的值,讨论了宏观和微观晶体生长过程以及粘性流动和结构弛豫运动之间的相互关系。值得注意的是,这种方法有助于我们在粉状吲哚美辛材料的情况下区分特定的晶体生长模式。Ediger 的解耦参数用于量化粘度和晶体生长之间的关系。提出了结构域协同性、Tool-Narayanaswamy-Moynihan 弛豫模型参数与微观晶体生长之间的联系。