Das Partha Pratim, Rabby Monjur Morshed, Vadlamudi Vamsee, Raihan Rassel
Institute for Predictive Performance Methodologies, The University of Texas at Arlington Research Institute, Fort Worth, TX 76118, USA.
Mechanical and Aerospace Engineering Department, The University of Texas at Arlington, Arlington, TX 76019, USA.
Polymers (Basel). 2022 Oct 18;14(20):4403. doi: 10.3390/polym14204403.
The principal objective of this study is to employ non-destructive broadband dielectric spectroscopy/impedance spectroscopy and machine learning techniques to estimate the moisture content in FRP composites under hygrothermal aging. Here, classification and regression machine learning models that can accurately predict the current moisture saturation state are developed using the frequency domain dielectric response of the composite, in conjunction with the time domain hygrothermal aging effect. First, to categorize the composites based on the present state of the absorbed moisture supervised classification learning models (i.e., quadratic discriminant analysis (QDA), support vector machine (SVM), and artificial neural network-based multilayer perceptron (MLP) classifier) have been developed. Later, to accurately estimate the relative moisture absorption from the dielectric data, supervised regression models (i.e., multiple linear regression (MLR), decision tree regression (DTR), and multi-layer perceptron (MLP) regression) have been developed, which can effectively estimate the relative moisture absorption from the dielectric response of the material with an R¬2 value greater than 0.95. The physics behind the hygrothermal aging of the composites has then been interpreted by comparing the model attributes to see which characteristics most strongly influence the predictions.
本研究的主要目的是采用非破坏性宽带介电谱/阻抗谱和机器学习技术来估计湿热老化条件下纤维增强复合材料(FRP)中的水分含量。在此,利用复合材料的频域介电响应,结合时域湿热老化效应,开发了能够准确预测当前水分饱和状态的分类和回归机器学习模型。首先,为了基于吸收水分的当前状态对复合材料进行分类,已开发了监督分类学习模型(即二次判别分析(QDA)、支持向量机(SVM)和基于人工神经网络的多层感知器(MLP)分类器)。随后,为了从介电数据中准确估计相对吸湿量,已开发了监督回归模型(即多元线性回归(MLR)、决策树回归(DTR)和多层感知器(MLP)回归),这些模型能够根据材料的介电响应有效估计相对吸湿量,决定系数(R²)值大于0.95。然后,通过比较模型属性来解释复合材料湿热老化背后的物理原理,以确定哪些特征对预测影响最大。