Study of the Effect of the Use of Asphalt Binders Modified with Polymer Fibres from End-of-Life Tyres (ELT) on the Mechanical Properties of Hot Mix Asphalt at Different Operating Temperatures.

Processing of end-of-life tyres (ELT) produces polymer fibres (PFELT) as a by-product. PFELT currently presents a challenge to the recycling industry, due to the increasing numbers of ELT and lack of alternatives for the re-use of this material. The object of this investigation was to propose an alternative for re-using PFELT, in order to improve the performance properties of hot mix asphalt (HMA). This study enabled us to understand the relation between the addition of polymer fibre to the aggregate-binder matrix of the HMA in depth, as well as its effects on the mechanical properties of the resulting asphalt mix. To do this, we first made a physical and chemical characterization of the PFELT (TGA, SEM, polarized light, and fluorescence microscopy), establishing a modification methodology using two asphalt binders (CA-24 and CA-14) and three PFELT contents (0.1%, 0.3%, and 0.5%). The HMA was designed using the Marshall method. The mechanical performance of the HMA was evaluated in a range of operating temperatures, from -10 °C to 50 °C, observing the following properties: (1) resistance to thermal cracking; (2) stiffness modulus; (3) indirect tensile strength; and (4) resistance to permanent deformation. The results show that the addition of 0.3% and 0.5% of PFELT to the asphalt binder significantly improved the mechanical performance properties of the mixes studied, with a greater effect at high operating temperatures; the resistance to permanent deformation increased by more than 30%.