The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory of Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China.
Department of Preventive Dentistry, Hospital of Stomatology, Wuhan University, Hongshan District, Luo-Yu Road 237th, 430075, Wuhan, Hubei, China.
BMC Oral Health. 2022 Dec 28;22(1):649. doi: 10.1186/s12903-022-02668-3.
The ex vivo study is to compare the root canal preparation outcomes achieved by five nickel-titanium single-file instrumentation systems (M3-L, Reciproc Blue, V-Taper 2H, WaveOne Gold, XP-endo Shaper) in severely curved molar root canals.
A total of 60 root canals were selected from extracted human molar teeth with curvatures ranging from 25° to 50° and divided into five groups based on the instrumentation system employed (n = 12). Before and after root canal preparation, a Micro-CT scan was taken, and pre- and post-operative data were analyzed to evaluate the following parameters: volume increment of root canals (VI), untouched root canal areas (UTA), and canal transportation (CT). Apically extruded debris (AD) was collected during preparation. After that, all samples were separated into two parts and examined respectively by scanning electron microscope (SEM) to assess cleaning ability. Data were statistically analyzed with ANOVA (UTA, AD, VI) or Kruskal-Wallis test (CT, SEM-score), the level of significance was set at α = 0.05.
There were no significant differences between the five systems regarding the AD, VI, and UTA parameters (P > 0.05). In terms of CT, no significant difference was noted at the straight section of canal and apical levels, while XP-endo Shaper showed less canal transportation than M3-L at the level of curved vertex (P < 0.05), and the centering ability of V-Taper 2H was significantly better than WaveOne Gold at the initial point of bending (P < 0.05). Debris and smear layers were present on the canal walls of all specimens, the apical thirds of the canal presented higher SEM scores than the coronal thirds in all groups (P < 0.05). Reciproc Blue and XP-endo Shaper showed fewer smear scores than WaveOne Gold in the apical thirds (P < 0.01 and P < 0.05, respectively), and no statistical difference was found between other groups in the middle and coronal thirds.
The five single-file systems evaluated performed equally in apically debris extrusion, dentin removal, and untouched root canal areas, while XP-endo Shaper and V-Taper 2H resulted in less canal transportation compared to M3-L and WaveOne Gold. Regarding cleaning ability, Reciproc Blue and XP-endo Shaper were associated with less smear layer than WaveOne Gold in the apical thirds.
本离体研究旨在比较 5 种镍钛根管预备锉(M3-L、Reciproc Blue、V-Taper 2H、WaveOne Gold、XP-endo Shaper)在严重弯曲磨牙根管中的根管预备效果。
从 25°至 50°弯曲的人磨牙中选择 60 个根管,根据使用的仪器系统分为 5 组(n=12)。根管预备前后进行 Micro-CT 扫描,分析术前术后数据,评估以下参数:根管体积增量(VI)、未预备根管面积(UTA)和根管偏移(CT)。在预备过程中收集根尖挤出物(AD)。之后,所有样本均分为两部分,分别用扫描电子显微镜(SEM)检查以评估清洁能力。采用方差分析(UTA、AD、VI)或 Kruskal-Wallis 检验(CT、SEM 评分)对数据进行统计学分析,显著性水平设为α=0.05。
5 种系统在 AD、VI 和 UTA 参数方面无显著差异(P>0.05)。在 CT 方面,在直根管段和根尖水平无显著差异,而 XP-endo Shaper 在弯曲顶点处的根管偏移小于 M3-L(P<0.05),V-Taper 2H 的中心定位能力在弯曲起始点明显优于 WaveOne Gold(P<0.05)。所有标本的根管壁均有碎屑和玷污层,所有组的根尖 3 段 SEM 评分均高于冠 3 段(P<0.05)。Reciproc Blue 和 XP-endo Shaper 在根尖 3 段的玷污层评分低于 WaveOne Gold(P<0.01 和 P<0.05),而其他组在中 3 段和冠 3 段无统计学差异。
评价的 5 种单文件系统在根尖碎屑挤出、牙本质去除和未预备根管面积方面表现相当,而 XP-endo Shaper 和 V-Taper 2H 与 M3-L 和 WaveOne Gold 相比,根管偏移较小。在清洁能力方面,Reciproc Blue 和 XP-endo Shaper 在根尖 3 段的玷污层比 WaveOne Gold 少。