Suppr超能文献

不同附加固定系统前路腰椎间融合术与斜外侧腰椎间融合术的计算比较:有限元分析。

Computational comparison of anterior lumbar interbody fusion and oblique lumbar interbody fusion with various supplementary fixation systems: a finite element analysis.

机构信息

Department of Orthopedics, Second Affiliated Hospital of Xi'an Jiaotong University, Xi'an, Shaanxi Province, China.

出版信息

J Orthop Surg Res. 2023 Jan 2;18(1):4. doi: 10.1186/s13018-022-03480-z.

Abstract

BACKGROUND AND OBJECTIVE

Anterior lumbar interbody fusion (ALIF) and oblique lumbar interbody fusion (OLIF) have shown a great surgical potential, while it has always been controversial which surgical approach and which type of fixation system should be selected. This study investigated the biomechanical response of ALIF and OLIF with various supplementary fixation systems using the finite element method.

MATERIALS AND METHODS

Lumbar L4-L5 ALIF and OLIF models stabilized by different supplementary fixation systems (stand-alone cage, integrated stand-alone cage, anterior plate, and bilateral pedicle screw) were developed to assess the segmental range of motion (ROM), endplate stress (EPS), and screw-bone interface stress (SBIS).

EXPERIMENTAL RESULTS

ALIF showed lower ROM and EPS than OLIF in all motion planes and less SBIS in the most of motion planes compared with OLIF when the anterior plate or pedicle screw was used. ALIF induced higher ROM, while lower EPS and SBIS than OLIF in the majority of motion planes when integrated stand-alone cage was utilized. Using a stand-alone cage in ALIF and OLIF led to cage migration. Integrated stand-alone cage prevented the cage migration, whereas caused significantly larger ROM, EPS, and SBIS than other fixation systems except for the rotation plane. In the most of motion planes, the pedicle screw had the lowest ROM, EPS, and SBIS. The anterior plate induced a slightly larger ROM, EPS, and SBIS than the pedicle screw, while the differences were not significant.

CONCLUSION

ALIF exhibited a better performance in postoperative segmental stability, endplate stress, and screw-bone interface stress than OLIF when the anterior plate or the pedicle screw was used. The pedicle screw could provide the greatest postoperative segmental stability, less cage subsidence incidence, and lower risk of fixation system loosening in ALIF and OLIF. The anterior plate could also contribute to the stability required and fewer complications, while not as effectively as the pedicle screw. Extreme caution should be regarded when the stand-alone cage is used due to the risk of cage migration. The integrated stand-alone cage may be an alternative method; however, further optimization is needed to reduce complications and improve postoperative segmental stability.

摘要

背景与目的

前路腰椎间融合术(ALIF)和斜侧腰椎间融合术(OLIF)具有很大的手术潜力,但哪种手术入路和哪种固定系统应该被选择,一直存在争议。本研究通过有限元方法,研究了不同附加固定系统的 ALIF 和 OLIF 的生物力学反应。

材料与方法

建立了腰椎 L4-L5 的 ALIF 和 OLIF 模型,通过不同的附加固定系统(独立 cage、一体化独立 cage、前路板和双侧椎弓根螺钉)进行稳定,以评估节段活动度(ROM)、终板应力(EPS)和螺钉-骨界面应力(SBIS)。

实验结果

与 OLIF 相比,在前路板或椎弓根螺钉固定时,ALIF 在所有运动平面的 ROM 和 EPS 较低,在大多数运动平面的 SBIS 较低。与 OLIF 相比,当使用一体化独立 cage 时,ALIF 引起的 ROM 较高,而 EPS 和 SBIS 较低。在大多数运动平面中,ALIF 和 OLIF 中使用独立 cage 会导致 cage 迁移。一体化独立 cage 可防止 cage 迁移,但除旋转平面外,与其他固定系统相比,会引起更大的 ROM、EPS 和 SBIS。在大多数运动平面中,椎弓根螺钉的 ROM、EPS 和 SBIS 最小。前路板引起的 ROM、EPS 和 SBIS 略大于椎弓根螺钉,但差异不显著。

结论

在前路板或椎弓根螺钉固定时,ALIF 的术后节段稳定性、终板应力和螺钉-骨界面应力均优于 OLIF。椎弓根螺钉可提供最大的术后节段稳定性,降低 cage 下沉发生率,降低 ALIF 和 OLIF 中固定系统松动的风险。前路板也可以提供所需的稳定性,并发症较少,但不如椎弓根螺钉有效。由于 cage 迁移的风险,在使用独立 cage 时应格外小心。一体化独立 cage 可能是一种替代方法,但需要进一步优化以减少并发症并提高术后节段稳定性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/c37e/9806898/27bdf161774c/13018_2022_3480_Fig1_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验