Department of Endurance, Institute for Applied Training Science, Leipzig,Germany.
German Cycling Federation, Frankfurt am Main,Germany.
Int J Sports Physiol Perform. 2023 Jan 3;18(2):157-163. doi: 10.1123/ijspp.2021-0464. Print 2023 Feb 1.
Following short-term all-out exercise, the maximal rate of glycolysis is frequently assessed on the basis of the maximal rate of lactate accumulation in the blood. Since the end of the interval without significant accumulation (talac) is 1 of 2 denominators in the calculation employed, accurate determination of this parameter is crucial. Although the very existence and definition of talac, as well as the validity of its determination as time-to-peak power (tPpeak), remain controversial, this parameter plays a key role in anaerobic diagnostics. Here, we describe a novel approach to determination of talac and compare it to the current standard.
Twelve elite track cyclists performed 3 maximal sprints (3, 8, and 12 s) and a high-rate, low-resistance pedaling test on an ergometer with monitoring of crank force and pedaling rate. Before and after each sprint, capillary blood samples were taken for determination of lactate accumulation. Fatigue-free force-velocity and power-velocity profiles were generated. talac was determined as tPpeak and as the time point of the first systematic deviation from the force-velocity profile (tFf).
Accumulation of lactate after the 3-second sprint was significant (0.58 [0.19] mmol L-1; P < .001, d = 1.982). tFf was <3 seconds and tPpeak was ≥3 seconds during all sprints (P < .001, d = - 2.111). Peak power output was lower than maximal power output (P < .001, d = -0.937). Blood lactate accumulation increased linearly with increasing duration of exercise (R2 ≥ .99) and intercepted the x-axis at ∼tFf.
Definition of talac as tPpeak can lead to incorrect conclusions. We propose determination of talac based on tFf, the end of the fatigue-free state that may reflect the beginning of blood lactate accumulation.
在短期全力运动后,通常基于血液中乳酸积累的最大速率来评估糖酵解的最大速率。由于无显著积累间隔的末端(talac)是计算中使用的两个分母之一,因此准确确定该参数至关重要。尽管 talac 的存在和定义,以及作为峰值功率时间(tPpeak)的确定的有效性仍然存在争议,但该参数在无氧诊断中起着关键作用。在这里,我们描述了一种确定 talac 的新方法,并将其与当前标准进行了比较。
12 名精英场地自行车运动员在测功机上进行了 3 次最大冲刺(3、8 和 12 秒)和一次高负荷、低阻力蹬踏测试,并监测曲柄力和蹬踏率。在每次冲刺前后,采集毛细血管血样以确定乳酸积累。生成疲劳前的力-速度和功率-速度曲线。talac 是通过 tPpeak 和第一个系统偏离力-速度曲线的时间点(tFf)来确定的。
3 秒冲刺后的乳酸积累有显著差异(0.58 [0.19] mmol L-1;P <.001,d = 1.982)。在所有冲刺中,tFf < 3 秒,tPpeak ≥ 3 秒(P <.001,d = - 2.111)。峰值功率输出低于最大功率输出(P <.001,d = -0.937)。血液乳酸积累与运动持续时间呈线性关系(R2 ≥.99),并在 x 轴处与 tFf 相交。
将 talac 定义为 tPpeak 可能会导致错误的结论。我们建议根据 tFf 来确定 talac,即无疲劳状态的结束,这可能反映了血液乳酸积累的开始。