Ren Xiaoxue, Gao Xiaoting, Cheng Yicheng, Xie Lingxia, Tong Liping, Li Wei, Chu Paul K, Wang Huaiyu
Institute of Biomedicine and Biotechnology, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, China.
University of Chinese Academy of Sciences, Beijing, China.
Front Bioeng Biotechnol. 2023 Jan 9;10:1076345. doi: 10.3389/fbioe.2022.1076345. eCollection 2022.
Mesenchymal stem cells (MSCs), with high self-renewal ability and multipotency, are commonly used as the seed cells for tissue engineering. However, the reduction and loss of multipotential ability after necessary expansion set up a heavy obstacle to the clinical application of MSCs. Here in this study, we exploit the autologous crystallization ability of biocompatible poly (ε-caprolactone) (PCL) to obtain uniformly distributed nanoneedle arrays. By controlling the molecular weight of PCL, nanoneedle with a width of 2 μm and height of 50 nm, 80 nm, and 100 nm can be successfully fabricated. After surface chemical modification with polydopamine (PDA), the water contact angle of the fabricated PCL nanoneedle arrays are reduced from 84° to almost 60° with no significant change of the nanostructure. All the fabricated substrates are cultured with bone marrow MSCs (BMMSCs), and the adhesion, spreading, proliferation ability and multipotency of cells on different substrates are investigated. Compared with the BMMSCs cultured on pure PCL nanoneedle arrays, the decoration of PDA can improve the adhesion and spreading of cells and further change them from aggregated distribution to laminar distribution. Nevertheless, the laminar distribution of cultured cells leads to a weak cell-cell interaction, and hence the multipotency of BMMSCs cultured on the PCL-PDA substrates is decimated. On the contrary, the pure PCL nanoneedle arrays can be used to maintain the multipotency of BMMSCs clustered growth, and the PCL1 nanoneedle array with a height of 50 nm is more promising than the other 2 with regard to the highest proliferation rate and best multipotential differentiation ability of cultured cells. Interestingly, there is a positive correlation between the strength of cell-cell interaction and the multipotency of stem cells . In conclusion, we have successfully maintained the multipotency of BMMSCs by using the PCL nanoneedle arrays, especially the PCL1 nanoneedle array with a height of 50 nm, as the substrates for extension, and further revealed the importance of cell-cell interaction on the multipotency of MSCs. The study provides a theoretical basis for the behavioral regulation of MSCs, and is instructive to the design of tissue engineering scaffolds.
间充质干细胞(MSCs)具有高度自我更新能力和多能性,常用于组织工程的种子细胞。然而,在必要的扩增后多能性能力的降低和丧失给MSCs的临床应用设置了严重障碍。在本研究中,我们利用生物相容性聚(ε-己内酯)(PCL)的自组装结晶能力获得均匀分布的纳米针阵列。通过控制PCL的分子量,可以成功制备宽度为2μm、高度为50nm、80nm和100nm的纳米针。用聚多巴胺(PDA)进行表面化学修饰后,制备的PCL纳米针阵列的水接触角从84°降低到近60°,纳米结构无明显变化。所有制备的基底均与骨髓间充质干细胞(BMMSCs)共培养,并研究不同基底上细胞的黏附、铺展、增殖能力和多能性。与在纯PCL纳米针阵列上培养的BMMSCs相比,PDA修饰可改善细胞的黏附和铺展,并进一步将其从聚集分布转变为层状分布。然而,培养细胞的层状分布导致细胞间相互作用较弱,因此在PCL-PDA基底上培养的BMMSCs的多能性降低。相反,纯PCL纳米针阵列可用于维持BMMSCs聚集生长的多能性,并且就培养细胞的最高增殖率和最佳多能分化能力而言,高度为50nm的PCL1纳米针阵列比其他两种更具前景。有趣的是,细胞间相互作用的强度与干细胞的多能性之间存在正相关。总之,我们成功地利用PCL纳米针阵列,特别是高度为50nm的PCL1纳米针阵列作为扩展基底来维持BMMSCs的多能性,并进一步揭示了细胞间相互作用对MSCs多能性的重要性。该研究为MSCs的行为调控提供了理论依据,对组织工程支架的设计具有指导意义。