Department of Biomedical Engineering, Indiana University - Purdue University Indianapolis, Indianapolis, Indiana, USA.
Galvani Bioelectronics, Collegeville, Pennsylvania, USA.
Artif Organs. 2023 Apr;47(4):705-720. doi: 10.1111/aor.14500. Epub 2023 Jan 31.
The intrinsic electrical material properties of the laminar components of the mammalian peripheral nerve bundle are important parameters necessary for the accurate simulation of the electrical interaction between nerve fibers and neural interfaces. Improvements in the accuracy of these parameters improve the realism of the simulation and enables realistic screening of novel devices used for extracellular recording and stimulation of mammalian peripheral nerves. This work aims to characterize these properties for mammalian peripheral nerves to build upon the resistive parameter set established by Weerasuriya et al. in 1984 for amphibian somatic peripheral nerves (frog sciatic nerve) that is currently used ubiquitously in the in-silico peripheral nerve modeling community.
A custom designed characterization chamber was implemented and used to measure the radial and longitudinal impedance between 10 mHz and 50 kHz of freshly excised canine vagus nerves using four-point impedance spectroscopy. The impedance spectra were parametrically fitted to an equivalent circuit model to decompose and estimate the components of the various laminae. Histological sections of the electrically characterized nerves were then made to quantify the geometry and laminae thicknesses of the perineurium and epineurium. These measured values were then used to calculate the estimated intrinsic electrical properties, resistivity and permittivity, from the decomposed resistances and reactances. Finally, the estimated intrinsic electrical properties were used in a finite element method (FEM) model of the nerve characterization setup to evaluate the realism of the model.
The geometric measurements were as follows: nerve bundle (1.6 ± 0.6 mm), major nerve fascicle diameter (1.3 ± 0.23 mm), and perineurium thickness (13.8 ± 2.1 μm). The longitudinal resistivity of the endoneurium was estimated to be 0.97 ± 0.05 Ωm. The relative permittivity and resistivity of the perineurium were estimated to be 2018 ± 391 and 3.75 kΩm ± 981 Ωm, respectively. The relative permittivity and resistivity of the epineurium were found to be 9.4 × 10 ± 8.2 × 10 and 55.0 ± 24.4 Ωm, respectively. The root mean squared (RMS) error of the experimentally obtained values when used in the equivalent circuit model to determine goodness of fit against the measured impedance spectra was found to be 13.0 ± 10.7 Ω, 2.4° ± 1.3°. The corner frequency of the perineurium and epineurium were found to be 2.6 ± 1.0 kHz and 368.5 ± 761.9 Hz, respectively. A comparison between the FEM model in-silico impedance experiment against the ex-vivo methods had a RMS error of 159.0 ± 95.4 Ω, 20.7° ± 9.8°.
Although the resistive values measured in the mammalian nerve are similar to those of the amphibian model, the relative permittivity of the laminae bring new information about the reactance and the corner frequency (frequency at peak reactance) of the peripheral nerve. The measured and estimated corner frequency are well within the range of most bioelectric signals, and are important to take into account when modeling the nerve and neural interfaces.
哺乳动物周围神经束的层状成分的固有电材料特性是神经纤维和神经界面之间电相互作用准确模拟所必需的重要参数。这些参数的准确性提高可以提高模拟的真实性,并能够对用于哺乳动物周围神经的体外记录和刺激的新型设备进行真实的筛选。这项工作旨在对哺乳动物周围神经进行特征描述,以建立 Weerasuriya 等人在 1984 年为两栖体躯体周围神经(青蛙坐骨神经)建立的电阻参数集,目前该参数集在体外神经建模社区中被广泛使用。
使用定制设计的特性描述室,通过四点阻抗谱法在 10 mHz 至 50 kHz 范围内测量新鲜切除的犬迷走神经的径向和纵向阻抗。将阻抗谱参数拟合到等效电路模型中,以分解并估计各层的组件。然后对电特性神经进行组织学切片,以量化神经外膜和神经内膜的几何形状和层厚度。然后,使用这些测量值从分解的电阻和电抗中计算估计的固有电特性,电阻率和介电常数。最后,将估计的固有电特性用于神经特性描述设置的有限元方法(FEM)模型中,以评估模型的真实性。
几何测量值如下:神经束(1.6±0.6mm),主要神经束直径(1.3±0.23mm)和神经外膜厚度(13.8±2.1μm)。内神经束的纵向电阻率估计为 0.97±0.05Ωm。神经外膜的相对介电常数和电阻率估计分别为 2018±391 和 3.75 kΩm±981Ωm。发现神经外膜的相对介电常数和电阻率分别为 9.4×10±8.2×10和 55.0±24.4Ωm。当使用等效电路模型确定与测量阻抗谱的拟合度时,实验获得的值的均方根(RMS)误差为 13.0±10.7Ω,2.4°±1.3°。发现神经外膜和神经内膜的拐角频率分别为 2.6±1.0kHz 和 368.5±761.9Hz。FEM 模型的体内阻抗实验与离体方法的比较的 RMS 误差为 159.0±95.4Ω,20.7°±9.8°。
尽管哺乳动物神经中测量的电阻值与两栖模型相似,但层的相对介电常数为外周神经的电抗和拐角频率(电抗峰值频率)提供了新信息。测量和估计的拐角频率均在大多数生物电信号的范围内,在对神经和神经界面进行建模时需要考虑这些因素。