Kadys Arūnas, Mickevičius Jūras, Badokas Kazimieras, Strumskis Simonas, Vanagas Egidijus, Podlipskas Žydrūnas, Ignatjev Ilja, Malinauskas Tadas
Institute of Photonics and Nanotechnology, Vilnius University, Sauletekio Ave. 3, LT-10257 Vilnius, Lithuania.
Evana Technologies, Ltd., Mokslininku St. 2A-120, LT-08412 Vilnius, Lithuania.
Nanomaterials (Basel). 2023 Feb 20;13(4):784. doi: 10.3390/nano13040784.
Epitaxial lateral overgrowth (ELO) of GaN epilayers on a sapphire substrate was studied by using a laser-patterned graphene interlayer. Monolayer graphene was transferred onto the sapphire substrate using a wet transfer technique, and its quality was confirmed by Raman spectroscopy. The graphene layer was ablated using a femtosecond laser, which produced well-defined patterns without damaging the underlying sapphire substrate. Different types of patterns were produced for ELO of GaN epilayers: stripe patterns were ablated along the [1¯100]sapphire and [112¯0]sapphire directions, a square island pattern was ablated additionally. The impact of the graphene pattern on GaN nucleation was analyzed by scanning electron microscopy. The structural quality of GaN epilayers was studied by cathodoluminescence. The investigation shows that the laser-ablated graphene can be integrated into the III-nitride growth process to improve crystal quality.
利用激光图案化的石墨烯中间层研究了蓝宝石衬底上氮化镓外延层的横向外延生长(ELO)。采用湿法转移技术将单层石墨烯转移到蓝宝石衬底上,并通过拉曼光谱确认其质量。使用飞秒激光烧蚀石墨烯层,产生了清晰的图案,而不会损坏下面的蓝宝石衬底。为氮化镓外延层的ELO制作了不同类型的图案:沿着蓝宝石的[1¯100]和[112¯0]方向烧蚀条纹图案,另外还烧蚀了方形岛状图案。通过扫描电子显微镜分析了石墨烯图案对氮化镓成核的影响。通过阴极发光研究了氮化镓外延层的结构质量。研究表明,激光烧蚀的石墨烯可以集成到III族氮化物生长过程中以提高晶体质量。