Department of Restorative Dentistry, Araraquara Dental School, São Paulo State University (UNESP), School of Dentistry, Rua Humaitá, 1680, Araraquara, SP, CEP 14801-903, Brazil.
OMFS IMPATH Research Group, Department of Imaging and Pathology, Faculty of Medicine, KU Leuven and Oral and Maxillofacial Surgery, University Hospitals Leuven, Leuven, Belgium.
Sci Rep. 2023 Mar 25;13(1):4881. doi: 10.1038/s41598-023-31595-8.
The aim of this study was to evaluate the foraminal enlargement and its influence on microcrack formation and apical transportation in root canals with apical curvature. Eighteen maxillary lateral incisors with apical curvature were selected by using micro-CT images. Root canals were randomly divided in two groups (n = 9) according to root canal preparation using two working lengths: 1 mm short of the apical foramen (control group) and 1 mm beyond the apical foramen (foraminal enlargement). For both groups Reciproc Blue R40 was used for root canal instrumentation. Specimens were scanned by nano-CT (UniTOM HR) before and after root canal preparation. Percentage, length, and width of microcracks, and apical transportation were assessed. Kappa, chi-square and McNemar tests were used for qualitative analyses while paired and unpaired t-test were used for quantitative analyses (α = 0.05). For both groups, rather similar and low percentages of microcracks were observed before root canal preparation (P > 0.05). The foraminal enlargement promoted new microcracks, not observed in the control group. An increase in microcrack length was observed when the foraminal enlargement was performed (P < 0.05). Higher apical transportation was observed when foraminal enlargement was performed (P < 0.05). Foraminal enlargement using a heat-treated reciprocating file size 40 promoted microcracks and higher apical transportation than root canal preparation up to 1 mm short of apical foramen.
本研究旨在评估根尖孔扩大及其对上颌侧切牙弯曲根管微裂纹形成和根尖偏移的影响。通过微 CT 图像选择 18 颗具有根尖弯曲的上颌侧切牙。根据根管预备使用两种工作长度(距根尖孔 1mm 和超出根尖孔 1mm)将根管随机分为两组(每组 n=9)。两组均使用 Reciproc Blue R40 进行根管预备。预备前后分别用 nano-CT(UniTOM HR)对标本进行扫描。评估微裂纹的百分比、长度和宽度以及根尖偏移。使用 Kappa、卡方和 McNemar 检验进行定性分析,配对和非配对 t 检验进行定量分析(α=0.05)。对于两组,预备前观察到的微裂纹百分比均较低且相似(P>0.05)。根尖孔扩大会产生在对照组中未观察到的新微裂纹。当进行根尖孔扩大时,微裂纹长度增加(P<0.05)。进行根尖孔扩大时,根尖偏移增加(P<0.05)。与预备至距根尖孔 1mm 相比,使用热处理往复锉 40 扩大根尖孔会导致更多的微裂纹和更大的根尖偏移。