Department of Biomedical Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia.
Department of Electrical Engineering, Faculty of Engineering and Technology, Applied Science Private University, Amman, Jordan.
PLoS One. 2023 Apr 13;18(4):e0284531. doi: 10.1371/journal.pone.0284531. eCollection 2023.
In this article, a heterogeneous multimodal anthropomorphic breast phantom with carcinoma is introduced to meet the response of the natural breast tissue when imaged using ionizing and non-ionizing machines. The skin, adipose, fibroglandular, pectoral muscle, and carcinoma tissue were mimicked. A T1-weighted breast magnetic resonance image with BI-RADS I tissue segmentation was used for molds creation. The tissue-mimicking materials (TMMs) were tailored in terms of their elemental composition weight fractions and their response to ionization radiation parameters. These are the mass attenuation coefficient (MAC), electron density (ne) and effective atomic number (Zeff). The behaviour of the TMMs, when exposed to a wide range of ionization radiation energy, was investigated analytically and numerically using X-COM. The achieved results showed an excellent agreement with the corresponding properties of the natural breast elemental compositions as reported by the International Commission on Radiation Units and Measurements (ICRU). The MAC of the TMMs and the ICRU-based breast tissue were found to be consistent. The maximum percentage of error in ne and Zeff amounts to only 2.93% and 5.76%, respectively. For non-ionizing imaging, the TMMs were characterized in term of T1 and T2 relaxation times. Using our preclinical MRI unit, the TMMs relaxation times were measured and compared to the natural tissue. The fabricated phantom was validated experimentally using CT, MRI, and Mammographic machines. The achieved images of the TMMs were in alignment with the real tissue in terms of CT HU values and grayscale colors. T1W and T2W images on MRI revealed the expected contrast between TMMs as in natural tissue.
本文介绍了一种具有癌性的异质多模态拟人化乳房体模,以满足使用电离和非电离机器成像时对自然乳房组织的响应。模拟了皮肤、脂肪、纤维腺体、胸肌和癌组织。使用具有 BI-RADS I 组织分割的 T1 加权乳房磁共振图像来创建模具。根据其元素组成重量分数及其对电离辐射参数的响应来定制组织模拟材料 (TMM)。这些参数是质量衰减系数 (MAC)、电子密度 (ne) 和有效原子序数 (Zeff)。使用 X-COM 对 TMM 在广泛的电离辐射能量下的行为进行了分析和数值研究。所得到的结果与国际辐射单位和测量委员会 (ICRU) 报告的天然乳房元素组成的相应特性非常吻合。TMM 的 MAC 和基于 ICRU 的乳房组织被发现是一致的。ne 和 Zeff 的最大误差百分比分别仅为 2.93%和 5.76%。对于非电离成像,TMM 是根据 T1 和 T2 弛豫时间来表征的。使用我们的临床前 MRI 设备,测量了 TMM 的弛豫时间并与自然组织进行了比较。使用 CT、MRI 和乳腺机对制造的体模进行了实验验证。TMM 的图像在 CT HU 值和灰度颜色方面与真实组织一致。MRI 上的 T1W 和 T2W 图像显示了 TMM 之间与自然组织中预期的对比度。