Effect of Biosilicate Addition on Physical-Mechanical and Biological Properties of Dental Glass Ionomer Cements.

This study investigated the influence of incorporating Biosilicate on the physico-mechanical and biological properties of glass ionomer cement (GIC). This bioactive glass ceramic (23.75% NaO, 23.75% CaO, 48.5% SiO, and 4% PO) was incorporated by weight (5%, 10%, or 15%) into commercially available GICs (Maxxion R and Fuji IX GP). Surface characterization was made by SEM ( = 3), EDS ( = 3), and FTIR ( = 1). The setting and working (S/W time) times ( = 3) and compressive strength (CS) were analyzed ( = 10) according to ISO 9917-1:2007. The ion release (n = 6) was determined and quantified by ICP OES and by UV-Vis for Ca, Na, Al, Si, P, and F. To verify cell cytotoxicity, stem cells from the apical papilla (SCAP) were exposed to eluates ( = 3, at a ratio of 1.8 cm/mL) and analyzed 24 h post-exposure. Antimicrobial activity against (ATCC 25175, NCTC 10449) was analyzed by direct contact for 2 h ( = 5). The data were submitted for normality and lognormality testing. One-way ANOVA and Tukey's test were applied for the working and setting time, compressive strength, and ion release data. Data from cytotoxicity and antimicrobial activity were submitted for Kruskal-Wallis' testing and Dunn's post hoc test (α = 0.05). Among all experimental groups, only those with 5% (wt) of Biosilicate showed better surface quality. Only M5% showed a comparable W/S time to the original material ( = 0.7254 and = 0.5912). CS was maintained for all Maxxion R groups ( > 0.0001) and declined for Fuji IX experimental groups ( < 0.0001). The Na, Si, P, and F ions released were significantly increased for all Maxxion R and Fuji IX groups ( < 0.0001). Cytotoxicity was increased only for Maxxion R with 5% and 10% of Biosilicate. A higher inhibition of growth was observed for Maxxion R with 5% of Biosilicate (less than 100 CFU/mL), followed by Maxxion R with 10% of Biosilicate ( = 0.0053) and Maxxion R without the glass ceramic ( = 0.0093). Maxxion R and Fuji IX presented different behaviors regarding Biosilicate incorporation. The impacts on physico-mechanical and biological properties were different depending on the GIC, but therapeutic ion release was increased for both materials.