AlZoubi Tariq, Mourched Bachar, Al Gharram Mahmoud, Makhadmeh Ghaseb, Abu Noqta Osama
College of Engineering and Technology, American University of the Middle East, Egaila 54200, Kuwait.
Department of Physics, School of Basic Sciences and Humanities, German Jordanian University, Amman 11180, Jordan.
Nanomaterials (Basel). 2023 Jul 31;13(15):2221. doi: 10.3390/nano13152221.
In this study, a hybrid organic-inorganic perovskite solar cell (PSC) based on methylammonium germanium triiodide (MAGeI), which is composed of methylammonium (CH3NH3+) cations and germanium triiodide (GeI3-) anions, has been numerically studied using SCAPS-1d codes. An extensive investigation of various electron transport layers (ETLs) and hole transport layers (HTLs) was conducted to identify the most optimal device configuration. The FTO/ZnOS/MAGeI/PEDOT-WO structure performed the highest efficiency of all combinations tested, with an impressive optimized efficiency of 15.84%. This configuration exhibited a of 1.38 V, J of 13.79 mA/cm, and FF of 82.58%. J-V characteristics and external quantum efficiency (EQE) measurements indicate that this device offers superior performance, as it has reduced current leakage, improved electron and hole extraction characteristics, and reduced trap-assisted interfacial recombination. Optimum device performance was achieved at active layer thickness of 560 nm. These findings may also serve as a basis for developing lightweight and ultra-thin solar cells, in addition to improving overall efficiency. Furthermore, a comprehensive correlation study was conducted to evaluate the optimum thickness and doping level for both ZnOS-ETL and PEDOT-WO-HTL. The photovoltaic performance parameters of the FTO/ZnOS/MAGeI/PEDOT-WO structure were analyzed over a wide temperature range (275 K to 450 K). The structure exhibited stable performance at elevated operating temperatures up to 385 K, with only minimal degradation in PCE of approximately 0.42%. Our study underscores the promise of utilizing cost-effective and long-term stability materials like ZnOS and PEDOT-WO alongside the toxic-free MAGeI perovskite. This combination exhibits significant potential for eco-friendly PSC, paving the way for the development of highly efficient ultra-thin PSC.
在本研究中,基于由甲基铵(CH3NH3+)阳离子和三碘化锗(GeI3-)阴离子组成的三碘化甲基铵锗(MAGeI)的有机-无机杂化钙钛矿太阳能电池(PSC),已使用SCAPS-1d代码进行了数值研究。对各种电子传输层(ETL)和空穴传输层(HTL)进行了广泛研究,以确定最优的器件结构。FTO/ZnOS/MAGeI/PEDOT-WO结构在所有测试组合中表现出最高效率,令人印象深刻的优化效率为15.84%。该结构的开路电压为1.38 V,电流密度为13.79 mA/cm,填充因子为82.58%。电流-电压(J-V)特性和外量子效率(EQE)测量表明,该器件具有卓越性能,因为它减少了电流泄漏,改善了电子和空穴提取特性,并减少了陷阱辅助界面复合。在有源层厚度为560 nm时实现了最佳器件性能。这些发现除了提高整体效率外,还可为开发轻质超薄太阳能电池提供基础。此外,还进行了全面的相关性研究,以评估ZnOS-ETL和PEDOT-WO-HTL的最佳厚度和掺杂水平。在很宽的温度范围(275 K至450 K)内分析了FTO/ZnOS/MAGeI/PEDOT-WO结构的光伏性能参数。该结构在高达385 K的升高工作温度下表现出稳定性能,功率转换效率(PCE)仅略有下降,约为0.42%。我们的研究强调了使用像ZnOS和PEDOT-WO这样具有成本效益和长期稳定性的材料以及无毒的MAGeI钙钛矿的前景。这种组合在环保型PSC方面具有巨大潜力,为高效超薄PSC的发展铺平了道路。