Liu Wenkai, Li Hengyu, Gao Qi, Zhao Da, Yu Yang, Xiang Qin, Cheng Xiaojun, Wang Zhong Lin, Long Wei, Cheng Tinghai
Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming, 650500, China.
Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, China.
Adv Mater. 2023 Dec;35(52):e2307184. doi: 10.1002/adma.202307184. Epub 2023 Nov 23.
The monitoring of micro-droplets parameters is significant to the development of droplet microfluidics. However, existing monitoring methods have drawbacks such as high cost, interference with droplet movement, and even the potential for cross-contamination. Herein, a micro-droplets monitoring method (MDMM) based on liquid-solid triboelectric nanogenerator (LS-TENG) is proposed, which can realize non-invasive and self-powered monitoring of micro-droplets in a microfluidic chip. The droplet frequency is monitored by voltage pulse frequency and a mathematical model is established to monitor the droplet length and velocity. Furthermore, this work constructs micro-droplets sensor (MDS) based on the MDMM to carry out the experiment. The coefficients of determination (R ) of the fitting curves of the micro-droplets frequency, length, and velocity monitoring are 0.998, 0.997, and 0.995, respectively. To prove the universal applicability of the MDMM, the micro-droplets generated by different liquid media and channel structures are monitored. Eventually, a micro-droplet monitoring system is built, which can realize the counting of micro-droplets and the monitoring of droplet frequency and length. This work provides a novel approach for monitoring micro-droplets parameters, which holds the potential to advance developments in the field of microfluidics.
微滴参数的监测对于微滴微流控技术的发展具有重要意义。然而,现有的监测方法存在成本高、干扰微滴运动、甚至存在交叉污染风险等缺点。在此,提出了一种基于液-固摩擦纳米发电机(LS-TENG)的微滴监测方法(MDMM),该方法可实现对微流控芯片中微滴的非侵入式自供电监测。通过电压脉冲频率监测微滴频率,并建立数学模型来监测微滴长度和速度。此外,本工作基于MDMM构建了微滴传感器(MDS)并进行实验。微滴频率、长度和速度监测拟合曲线的决定系数(R )分别为0.998、0.997和0.995。为证明MDMM的普遍适用性,对不同液体介质和通道结构产生的微滴进行了监测。最终,构建了一个微滴监测系统,该系统可实现微滴计数以及微滴频率和长度的监测。本工作为微滴参数监测提供了一种新方法,有望推动微流控领域的发展。