Doyle Bradley, Madden Leigh A, Pamme Nicole, Jones Huw S
School of Natural Sciences, University of Hull HU6 7RX UK.
Centre for Biomedicine, University of Hull HU6 7RX UK.
RSC Adv. 2023 Sep 18;13(40):27696-27704. doi: 10.1039/d3ra03742h.
The study of naturally circulating drug metabolites has been a focus of interest, since these metabolites may have different therapeutic and toxicological effects compared to the parent drug. The synthesis of metabolites outside of the human body is vital in order to conduct studies into the pharmacological activities of drugs and bioactive compounds. Current synthesis methods require significant purification and separation efforts or do not provide sufficient quantities for use in pharmacology experiments. Thus, there is a need for simple methods yielding high conversions whilst bypassing the requirement for a separation. Here we have developed and optimised flow chemistry methods in glass microfluidic reactors utilising surface-immobilised enzymes for sulfonation (SULT1a1) and glucuronidation (UGT1a1). Conversion occurs in flow, the precursor and co-factor are pumped through the device, react with the immobilised enzymes and the product is then simply collected at the outlet with no separation from a complex biological matrix required. Conversion only occurred when both the correct co-factor and enzyme were present within the microfluidic system. Yields of 0.97 ± 0.26 μg were obtained from the conversion of resorufin into resorufin sulfate over 2 h with the SULT1a1 enzyme and 0.47 μg of resorufin glucuronide over 4 h for UGT1a1. This was demonstrated to be significantly more than static test tube reactions at 0.22 μg (SULT1a1) and 0.19 μg (UGT1a1) over 4 h. With scaling out and parallelising, useable quantities of hundreds of micrograms for use in pharmacology studies can be synthesised simply.
对天然循环药物代谢物的研究一直是人们关注的焦点,因为与母体药物相比,这些代谢物可能具有不同的治疗和毒理学效应。在人体外合成代谢物对于开展药物和生物活性化合物的药理活性研究至关重要。目前的合成方法需要大量的纯化和分离工作,或者无法提供足够数量用于药理学实验。因此,需要简单的方法来实现高转化率,同时无需进行分离。在此,我们开发并优化了玻璃微流控反应器中的流动化学方法,利用表面固定化酶进行磺化反应(SULT1a1)和葡萄糖醛酸化反应(UGT1a1)。反应在流动过程中发生,前体和辅助因子被泵入装置,与固定化酶反应,然后产物只需在出口处收集,无需从复杂的生物基质中分离。只有当微流控系统中同时存在正确的辅助因子和酶时才会发生转化。使用SULT1a1酶,在2小时内将试卤灵转化为硫酸试卤灵可获得0.97±0.26μg的产量,使用UGT1a1酶,在4小时内可获得0.47μg的试卤灵葡萄糖醛酸化物。结果表明,这显著高于静态试管反应,后者在4小时内的产量分别为0.22μg(SULT1a1)和0.19μg(UGT1a1)。通过扩大规模和并行操作,可以简单地合成数百微克可用于药理学研究的可用量。