Nagarajan Navashree, Panchatcharam Parthasarathy
SERB, Department of Electronics and Communication Engineering, CMR Institute of Technology, Bengaluru, 560037, India.
Department of Electronics and Communication Engineering, CMR Institute of Technology, Bengaluru, 560037, India.
Heliyon. 2023 Sep 1;9(9):e19741. doi: 10.1016/j.heliyon.2023.e19741. eCollection 2023 Sep.
Cu-Fe NPs/ZEA/Gr electrochemical biosensor is developed by sol-gel spin coating technique, where copper-iron nanoparticles (Cu-Fe NPs) is synthesized using a chemical reduction method and modified with Zeolite & Graphene to develop a hybrid nanocomposite - Cu-Fe NPs/ZEA/Gr. The synthesized nanocomposite is then mixed with poly (vinyl alcohol) as a binding agent and coated on to the glass substrate to produce thin film electrode. Then the electrode was analyzed for structural and morphological studies using XRD, SEM, TEM, UV-VIS, absorption, and emission spectra. The presence of Cu-Fe NPs, ZEA, and Gr in the nanocomposite is confirmed by the XRD diffraction peaks, while SEM investigation revealed that the hybrid composite has a particle size of around 7.25 nm with a body-centred cubic structure. The TEM images show that bimetallic nanoparticles were incorporated into the ZEA shell, which was surrounded by a layer of transparent graphene. Furthermore, the nanocomposite exhibited a distinct absorption peak at 395 nm, as evidenced by UV-VIS, absorption, and emission spectra. The electrochemical tests demonstrated that the Cu-Fe NPs/ZEA/Gr nanocomposite electrode showed an excellent electrocatalytic and selective properties towards the electrooxidation of dopamine to dopamine-o-quinone. The detection limit of the Cu-Fe NPs/ZEA/Gr nanocomposite thin film was found to be 0.058 μM, with a sensitivity of 1.97 μAμMcm. The enhanced catalytic performance of the Cu-Fe NPs/ZEA/Gr electrode is attributed to the unique nanostructured materials coating on the glass substrate. The findings suggest that nano-hybrid materials can be a viable option for developing electrochemical biosensors to monitor dopamine levels in biological fluids. This indicates that the concept of nanoarchitectonics utilized to produce dopamine sensors may lead to new diagnostic and therapeutic approaches for neurological disorders associated with dopamine dysregulation.
通过溶胶 - 凝胶旋涂技术制备了铜铁纳米粒子/沸石/石墨烯(Cu-Fe NPs/ZEA/Gr)电化学生物传感器,其中铜铁纳米粒子(Cu-Fe NPs)采用化学还原法合成,并与沸石和石墨烯进行改性,以制备杂化纳米复合材料——Cu-Fe NPs/ZEA/Gr。然后将合成的纳米复合材料与作为粘合剂的聚乙烯醇混合,并涂覆在玻璃基板上以制备薄膜电极。接着使用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外可见光谱(UV-VIS)、吸收光谱和发射光谱对电极进行结构和形态研究。XRD衍射峰证实了纳米复合材料中存在Cu-Fe NPs、ZEA和Gr,而SEM研究表明杂化复合材料的粒径约为7.25纳米,具有体心立方结构。TEM图像显示双金属纳米粒子被并入ZEA壳中,该壳被一层透明石墨烯包围。此外,紫外可见光谱、吸收光谱和发射光谱表明,该纳米复合材料在395纳米处有一个明显的吸收峰。电化学测试表明,Cu-Fe NPs/ZEA/Gr纳米复合电极对多巴胺电氧化为多巴胺邻醌表现出优异的电催化和选择性性能。发现Cu-Fe NPs/ZEA/Gr纳米复合薄膜的检测限为0.058微摩尔,灵敏度为1.97微安/微摩尔/平方厘米。Cu-Fe NPs/ZEA/Gr电极催化性能的增强归因于玻璃基板上独特的纳米结构材料涂层。研究结果表明,纳米杂化材料可能是开发电化学生物传感器以监测生物流体中多巴胺水平的可行选择。这表明用于生产多巴胺传感器的纳米结构设计概念可能会为与多巴胺失调相关的神经系统疾病带来新的诊断和治疗方法。